3M™ 5535A Cold Shrink QS-III Splice Kit, 35 kV, 1/0 AWG to 350 kcmil Conductor, 33 in L Splice, Silicon Rubber
Insulated Splice Kit, 35 kV
577238
MFG #: 5535A
3M™
1641.41000
/ ea
3M 5535A Series Cold Shrink QS-III Splice Kit is an inline splice designed to join 35kV tape shield, wire shield, UniShield® or longitudinally corrugated shielded power cables. The cold shrink design fits type MV-90/MV-105 cables with copper or aluminum conductors, and ensures a quick installation and excellent cable size transitions. The kit is 15,000 amps-rated for faults current protection.
- Brochure URL - 3m-cold-shrink-qs-iii-a-series-silicone-rubber-splice-brochure.pdf(Brochure URL)
- Seller Home Page URL - Country(Seller Home Page URL)
- WEB COMPLIANCE CERT URL - Scotch_054007_10083_Compliance_Certificate.pdf(WEB COMPLIANCE CERT URL)
- WEB INSTALL INSTR URL - qs-iii-5535a-splice-kit.pdf(WEB INSTALL INSTR URL)
- WEB LINE DRAWING URL(WEB LINE DRAWING URL)
- WEB SDS URL - boqkvwn1cy6kbcnt70mt.pdf(WEB SDS URL)
- WEB SPEC SHEET URL - 3mtm-cold-shrink-qs-iii-inline-splice-kits-35-kv.pdf(WEB SPEC SHEET URL)
- WEB TECH DRAWING URL - mediawebserver?mwsId=66666UF6EVsSyXTtlxfVlxf6EVtQEVs6EVs6EVs6E666666--(WEB TECH DRAWING URL)
- Features
In-line splice for joining tape shield, wire shield, UniShield® or longitudinally corrugated shielded power cables |
Special electrode design of the kit reduces the electrical stress at a critical cable/splice interface |
Designed for in-line splicing, feeder and distribution circuits, size transition splicing, direct burial installations and submerged locations |
Silicon rubber-splice body provides good high and low temperature performance, and the EPDM rubber jacket offers physical protection |
High-voltage, production-tested for partial discharge and AC ensure reliability |
Cold shrink design for quick and easy installation |
The cold shrink design fits type MV-90/MV-105 cables with copper conductors while ensuring a quick installation and better cable size transitions and 15,000 amps-rated for faults current protection |
Used with inline splicing, feeder and distribution circuits, Tape, Wire, UniShield® & Longitudinally corrugated (LC) shielded cables, transitions from shielded to neutral power cables, copper or aluminum conductors, size transition splicing, direct burial installations, submerged locations |
0.51 in - 1.7 in connector OD |
6 in aluminum/copper compression length, 6-1/2 in copper compression length, 5.12 in shearbolt connector length |
1090 PSI tensile strength |
610% elongation |
370 V/mil dielectric strength |
1/0 AWG, 2/0 AWG, 250 kcmil, 3/0 AWG, 350 kcmil, 4/0 AWG conductor sizes |
1/Case |