3M™ 5500 Cold Shrink QS-II Splice Kit, 15 kVAC, 0.6 in Dia Cable, 4 to 2/0 AWG Stranded Conductor, 9 in L Splice
Insulated Splice Kit, 15 kV
584791
MFG #: 7000005929
3M™
434.53000
/ ea
3M 5500 Series Molded Rubber QS-II Splice Kit is an inline splice designed to use on 15kV tape shield, wire shield, and UniShield® cables with copper or aluminum conductors. Its peroxide-cured EPDM rubber construction ensures a long life. The continuous current rating of each splice is the same as the current rating of the cable that it is sized to accommodate.
- Compliance Cert URL - Scotch_054007_10083_Compliance_Certificate.pdf(Compliance Cert URL)
- http://www.3m.com(Seller Home Page URL)
- Install Instructions 1 URL - 11579_TB3YFCZGM8LS9WH1.pdf(Install Instructions 1 URL)
- Install Instructions 1 URL - 5501-5502-inline-splicing-kits.pdf(Install Instructions 1 URL)
- Install Instructions URL - 5501-5502-inline-splicing-kits.pdf(Install Instructions URL)
- Line Drawing URL(Line Drawing URL)
- Safety Data Sheet URL - wmfrqcnbdmsicrtitbeu.pdf(Safety Data Sheet URL)
- Seller Home Page URL - Country(Seller Home Page URL)
- Tech Drawing URL - 11579_72I4V3C6UXGFMTOJ.pdf(Tech Drawing URL)
- Tech Drawing URL - mediawebserver?mwsId=SSSSSufSevTsZxtUNx_B48fSevUqevTSevTSevTSeSSSSSS--(Tech Drawing URL)
- Features
| In-line splice to use on tape shield, wire shield, or UniShield® cables |
| Designed for direct burial installations, indoor and outdoor applications |
| Peroxide-cured EPDM rubber construction provides physical protection |
| Factory tested to offer reliability |
| No special tools required for installation |
| Immediately energizable |
| Polyolefin foam, copper conductor |
| Shield continuity assembly results in fast, easy, effective continuation of shield across splice body |
| Accommodates 4 to 1/0 AWG, 2/0 AWG stranded and 2 to 1/0 AWG solid copper or aluminum conductors |
| 0.64 in connector OD |
| 2 in connector length |
| 1400 PSI tensile strength |
| 750% elongation |
| 365 V/mil dielectric strength |
| 1/Case |