3M™ 5300 Pigtail Motor Lead Splice Kit, 5/8 kVAC, 4 to 1/0 AWG Conductor, 8 to 9 in L Splice, EPDM
Cable Splicing Kits
69636
MFG #: 5322
3M®
306.21000
/ ea
3M 5300 Series Motor Lead Pigtail Splice Kit is perfect to use with copper compression lugs. This shielded and non-shielded splice kit is suitable for splicing motor lead cables to the incoming feeder cables. This kit is rated for 5/8 kV-rated applications.
- Safety Data Sheet URL - xqfghmkj79kto4bmudvm.pdf(Safety Data Sheet URL)
- Seller Home Page URL - Country(Seller Home Page URL)
- WEB COMPLIANCE CERT URL - Scotch_054007_10083_Compliance_Certificate.pdf(WEB COMPLIANCE CERT URL)
- WEB INSTALL INSTR URL - motor-lead-pigtail-splice-5320-series.pdf(WEB INSTALL INSTR URL)
- WEB LINE DRAWING URL(WEB LINE DRAWING URL)
- WEB SPEC SHEET URL - motor-lead-splicing-kits-5300-series.pdf(WEB SPEC SHEET URL)
- WEB TECH DRAWING URL - mediawebserver?mwsId=sssss72sFWtTz8Uun890Py_sFWuRFWtsFWtsFWtsFssssss--(WEB TECH DRAWING URL)
- Features
| Fast and simple installation |
| No torches or heat source required |
| No special tools required to install splice |
| THK walls to resist puncture and abrasion damage |
| High dielectric constant stress control included with 5/8 kV kits for shielded feeder cables for minimizing size and electrical stress |
| Easy re-entry, can be used on cables with a rated operating temperature of 90 deg C and an emergency overload rating of 130 deg C, to splice (insulate and seal) motor lead connections for 1000 VAC and less cables sized 16 AWG to 500 kcmil |
| Suitable for use with 30000 Series copper compression lugs or other UL listed copper lugs |
| 365 V mil dielectric strength |
| 750% elongation |
| 1400 psi tensile strength |
| 1 in maximum bolt length |
| Polyethylene cable |