3M™ 5300 Pigtail Motor Lead Splice Kit, 5/8 kVAC, 4 to 1/0 AWG Conductor, 12 to 13 in L Splice, EPDM
Insulated Splice Kit, 5-8 kV
610633
MFG #: 7000132542
3M™
474.90000
/ ea
3M 5300 Series Motor Lead Inline Splice Kit is perfect to use with copper compression lugs. This shielded and non-shielded splice kit is suitable for splicing motor lead cables to the incoming feeder cables. This kit is rated for 5/8 kV-rated applications.
- Compliance Cert URL - Scotch_054007_10083_Compliance_Certificate.pdf(Compliance Cert URL)
- http://www.3m.com(Seller Home Page URL)
- Install Instructions 1 URL - 11579_CUXREZJFK3QL28I5.pdf(Install Instructions 1 URL)
- Install Instructions URL - 5330-series-motor-lead-inline-splice.pdf(Install Instructions URL)
- Line Drawing URL(Line Drawing URL)
- Safety Data Sheet URL - fdsxmr342qwacnyjmptz.pdf(Safety Data Sheet URL)
- Spec Sheet URL - 11579_18575.pdf(Spec Sheet URL)
- Tech Drawing URL - 11579_E8BRI3Y4APJ1ULD7.pdf(Tech Drawing URL)
- Features
| Fast and simple installation |
| No torches or heat source required |
| No special tools required to install splice |
| Thick walls to resist puncture and abrasion damage |
| High dielectric constant stress control included with 5/8 kV kits for shielded feeder cables for minimizing size and electrical stress |
| Easy re-entry, can be used on cables with a rated operating temperature of 90 deg C and an emergency overload rating of 130 deg C, to splice (insulate and seal) motor lead connections for 1000 V and less cables sized 16 AWG to 500 Kcmil |
| Suitable for use with 30000 Series copper compression lugs or other UL listed copper lugs |
| 365 V/MIL dielectric strength |
| 750% elongation |
| 1400 PSI tensile strength |
| 1 in maximum bolt length |
| Polyethylene cable |