Hubbell Wiring Device-Kellems HBL316R6W PS, IEC, RECP, 2P3W,
Pin & Sleeve Receptacles
243165
MFG #: HBL316R6W
Hubbell Wiring Device-Kellems
123.01000
/ ea
- Catalog Number: HBL316R6W
- Country of Origin: US
- Dimensions: 3.33 in H
- Grade: Industrial
- Gross Weight Per Pack: 0.9000 lb
- Material: Composite/Thermoplastic
- Number Of Poles: 2
- Standards: ARRA CompliantBuy American Act CompliantRoHS CompliantUL 498UL 1682IEC 309-1309-2CSA C22.2 File No. 182.1
- Temperature Rating: -40 to 75 °C
- Terminal Type: Pressure Screw
- Type: Female Single Flanged Watertight
- UNSPSC: 39121406
- UPC 11: 78358540325
- UPC 12: 78358540325
- Stock Status: NONSTOCK
- Brand: Hubbell Wiring Device-Kellems
- Manufacturer: Hubbell
- Amperage Rating: 16 A
- Color: Blue
- Number of Wires: 3
- Voltage Rating: 220 to 240 VAC
Hubbell Pin and Sleeve products are designed and manufactured to meet the International Standard IEC 60309-1 and IEC 60309-2. This device standard calls out a singly rated, non-interchangeable configuration for every voltage and type of service throughout the world. Pin and sleeve device housings are color coded by voltage rating. The voltage is determined by the location of the female ground contact relative to the housing keyway. Simply by manufacturing the device with a ground contact in a certain "clock" position, the device will be rated for a particular voltage system. The diagram shows the keying position and the color coding that is associated with each voltage.
- Catalog URL - Wiring_Device_Kellems_HBL316C4W_Catalog.pdf(Catalog URL)
- Full Eng Drawing URL - Wiring_Device_Kellems_HBL320B6W_Datasheet.pdf(Full Eng Drawing URL)
- www.hubbell-wiring.com(Seller Home Page URL)
- None Required(Safety Data Sheet URL)
- Spec Sheet URL - WIRING_HBL316R6W_spec.pdf(Spec Sheet URL)
- Install Instructions URL - IDW_DOCUMENT_1487177529919.pdf(Install Instructions URL)
- Features
| Watertight |
| Corrosion-resistant self-closing gasketed cover |
| Sequential contact engagement to prevent a momentary over voltage On components |
| Sequential contact engagement to prevent a momentary over-voltage on components |
| Super tough insulated non metallic house for impact and chemical resistance |
| Color coded housings for easy identification |
| Multi-contact spring provides and maintains high unit pressure on mating pins to minimize temperature rise |
| Zytel® 101 nylon housing and mounting flange, reinforced thermoplastic polyester cover, solid neoprene gaskets, nickel plated brass cover screw |
| 3000 VAC minimum dielectric withstand voltage |
| 600 V RMS maximum working voltage |