Hubbell Wiring Device-Kellems HBL330MI7W PS, IEC, MECHINT, 2

Pin & Sleeve Mechanical Interlock Device
270820 MFG #: HBL330MI7W
Hubbell Wiring Device-Kellems
1410.33000 / ea
  • Application: High Ampacity Watertight Connections
  • ARRA Compliant: C
  • Buy American Compliant: C
  • Catalog Number: HBL330MI7W
  • Color: Red
  • Connection: Pressure Screw Terminals
  • Country of Origin: PL
  • Currency: USD
  • Dimensions: 11 in H x 8-3/4 in W x 7-3/4 in D
  • Enclosure: NEMA 4X/12/IP67
  • Environmental Conditions: Watertight
  • EU RoHS Indicator: N
  • Gross Weight Per Pack: 6.0500 lb
  • Gross Weight per Pack Metric: 2.79
  • Gross Weight UOM Metric: kg
  • Harmonization Tariff Schedule Code: 8537109170
  • Height: 7.20 in
  • Height [Metric]: 18.2880 cm
  • Length: 12.20 in
  • Length [Metric]: 30.9880 cm
  • Material: Thermoplastic
  • Mounting: Screw Mount
  • NEMA Rating: Non-NEMA
  • Phase: 1
  • Power Rating: 7.5 hp
  • Returnable: Y
  • Size: Standard Sized Product
  • Standard: UL Listed
  • Standards: ARRA CompliantBuy American Act CompliantUL 498IEC 309-1/309-2UL945 VA/V-0 Flammability RatingCSA Certified
  • Sub Brand: IEC 309 Pin and Sleeve Devices
  • Type: Mechanical interlock
  • UNSPSC: 39121406
  • UPC 11: 78358540583
  • UPC 12: 783585405834
  • Wattage: 14,400
  • Width: 7.90 in
  • Width [Metric]: 20.0660 cm
  • Wire Size: #12 AWG to #8 AWG
  • Stock Status: NONSTOCK
  • Brand: Hubbell Wiring Device-Kellems
  • Manufacturer: Hubbell
  • Amperage Rating: 30 A
  • Number of Wires: 3
  • Voltage Rating: 480 VAC
  • Number Of Poles: 2
The National Electrical Code (NEC®) requires a separate disconnect means within sight of all motor loads. The NEC requires the disconnecting means in a motor-circuit be listed as "Suitable as Motor Disconnect" if the motor is rated greater than 2 HP. Hubbell's revolutionary Circuit-Lock interlock incorporates the disconnect switch and receptacle in one compact, non-metallic and economical unit. Removing the plug and locking it out provides a visual means of verifying equipment has been disconnected. All Circuit-Lock mechanical interlocks can be locked out as a method of compliance with the OSHA Lockout/Tagout regulation. The switch cannot be turned ON until the plug is completely engaged and the plug cannot be removed until the switch is turned OFF. At the same time, it eliminates the possibility of making or breaking the circuit under load or making a casual or "lazy" connection. The non-metallic enclosure can be connected to the metallic conduit and not interfere with the ground continuity. In addition, these horsepower rated units are durable, watertight and easy to install. And they are compatible with IEC 60309-2 plugs. These Circuit-Lock units are available in 20, 30, 60 and 100A models and in 3, 4 and 5 wire configurations that are designed to the IEC 60309-1 and 60309-2 standards. Hubbell's Circuit-Lock Mechanical Interlocks are also available in "Reverse Service" versions. These units incorporate the disconnect switch and reverse service receptacle (inlet) in one compact, non-metallic and economical unit. These units are available in 30, 60 and 100A models, 4 wire configurations.
  • Applications
  • Features
High Ampacity Watertight Connections
Plug cannot be removed until the switch is turned off
Large gears enclosed in a gear box
Lockable handle to meet OSHA lockout/tagout regulations
Pre-wired IEC pin and sleeve receptacle
Pressure screw terminals connection
12 to 4 AWG copper wire terminal accommodation
Valox® face and base, neoprene enclosure gasket and shaft seal, zinc conduit hub
Withstands 3000 VAC minimum dielectric voltage
600 VAC rms maximum working voltage