Hubbell Wiring Device-Kellems Twist-Lock® Insulgrip® HBL2513 Heavy Duty Non-Grounding Locking Connector, 120/208 VAC, 20 A, 4 Poles, 5 Wires, Black/White
Locking Connectors
26309
MFG #: HBL2513
Hubbell Wiring Device-Kellems
97.35000
/ ea
- Application: Heavy Duty Industrial
- ARRA Compliant: C
- Buy American Compliant: C
- Catalog Number: HBL2513
- Conductor Range: #14AWG to #12AWG
- Connection: Screw Terminals
- Country of Origin: US
- Currency: USD
- Environmental Conditions: Indoor Dry unless protected by additional means
- EU RoHS Indicator: Y
- Gross Weight Per Pack: 0.4300 lb
- Gross Weight per Pack Metric: 0.07
- Gross Weight UOM Metric: kg
- Harmonization Tariff Schedule Code: 8536694020
- Height: 2.40 in
- Height [Metric]: 6.0960 cm
- Insulation: Insulated Body
- Length: 4.40 in
- Length [Metric]: 11.1760 cm
- Material: Nylon
- Mounting: Cord Mounted
- NEMA Rating: L21-20R
- Number Of Conductors: 5-Wire Grounding
- Returnable: Y
- Size: 2.33 in x 2.33 in x 3.86 in
- Standard: Certified to CSA C22.2 No.42;Fed.Spec. W-C-596;Listed to UL 498
- Standards: UL 498, Federal Specification W-C-596, CSA C22.2 No. 42 Certified, NEMA WD1, WD5 Compliant
- Sub Brand: Twist-Lock
- Temperature Rating: Maximum Continuous: 75?° C; Minimum Continuous: -40?° C w/o impact, -25?° with impact. °C
- Type: Connector Body
- UNSPSC: 39121421
- UPC 11: 78358503855
- UPC 12: 783585038551
- Width: 2.50 in
- Width [Metric]: 6.3500 cm
- Stock Status: NORMALLY STOCKED
- Brand: Hubbell Wiring Device-Kellems
- Manufacturer: Hubbell
- Amperage Rating: 20 A
- Color: Black/White
- Voltage Rating: 3 Phase WYE 120/208 VAC
- Number Of Poles: 4
- http://www.hubbell-wiring.com/(Seller Home Page URL)
- Install Instructions 1 URL - 11456_1LUJIPK9Y5XDHOBC.pdf(Install Instructions 1 URL)
- Install Instructions 1 URL - WIRING_PD1730_INSTALLINST.pdf(Install Instructions 1 URL)
- Line Drawing URL - 11456_XBQP1RLD7JVU5Y3G.pdf(Line Drawing URL)
- Line Drawing URL - WDK_HBL2513_DRAWINGS_PDF.pdf(Line Drawing URL)
- Spec Sheet URL - 11456_V8K0PL5AXSQ6FE32.pdf(Spec Sheet URL)
- Spec Sheet URL - WIRING_HBL2513_spec.pdf(Spec Sheet URL)
- Tech Drawing URL - IDW_DOCUMENT_1487176127276.pdf(Tech Drawing URL)
- Tech Drawing URL - WIRING_HBL2513_M7902_ACAD_DRAWING.dwg(Tech Drawing URL)
- Warranty URL - 11456_Y8PS6T0FNOGH3Q75.pdf(Warranty URL)
- Warranty URL - Wiring_WDK_Warranty.pdf(Warranty URL)
- Applications
- Features
Heavy Duty Industrial |
Standard Product |
Clear polycarbonate terminal retainer |
Natural white nylon cord clamp material |
0.08 in (2) steel nickel plated terminal clamp |
#10-32 brass (white finish on neutral screw when used) multi-drive terminal screw |
#10-32 brass (green finish) multi-drive ground screw |
Steel, zinc plated multi-drive cord clamp screw, steel, zinc plated multi-drive body holding screw |
Natural white nylon body contact carrier material |
Brass contact spring, brass spring binding plate |
0.031 in brass ground contact |
Molded-in or stamped on ratings, withstands 2000 VAC minimum dielectric voltage |
Certified for current interrupting at full rated current |
Maximum 30 deg C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of 75% temperature rise |
Round portable service cords of diameters commensurate with the device rating as defined in UL standard 62, CSA C22.2 No. 49 cord accommodation |
20 A, 12 AWG terminal accommodation |
Terminals identified in accordance with UL 498 (X, Y, Z, white, green) |
HB or better per UL 94 or CSA 22.2 No. 0.6 flammability |
UL type 4X environmental seal protects connection while-in use |
1 piece, engineered thermoplastic housing is impact resistant for heavy duty industrial environments |
Closure cap is included for environmental seal when device is not in use |
Superior cord grip design protects terminations from excess strain |