Motor Lead Splicing Kit (3 splices/kit)
Insulated Splice Kit, 5-8 kV
146334
MFG #: 7000006041
3M™
360.37000
/ ea
- Alternate Catalog Number: 5321
- ARRA Compliant: C
- Buy American Compliant: C
- Cable Type: Shielded
- Catalog Number: 7000006041
- Color: Black
- Country of Origin: USA
- Currency: USD
- EU RoHS Indicator: Y
- Gross Weight Per Pack: 2.4000 lb
- Gross Weight per Pack Metric: 1.09
- Gross Weight UOM Metric: kg
- Harmonization Tariff Schedule Code: 8546900000
- Height: 6.00 in
- Height [Metric]: 15.2400 cm
- Insulation Size: 0.3 to 0.51 in OD
- Length: 16.10 in
- Length [Metric]: 40.8940 cm
- Operating Temperature: 90°C
- Standards: OSHA 29 CFR 1910.1200RoHS 2011/65/EU
- Temperature Rating: 90 °C
- Type: Motor Lead Pigtail Splice
- UNSPSC: 39121718
- UPC 11: 05400712271
- UPC 12: 054007122715
- Width: 7.50 in
- Width [Metric]: 19.0500 cm
- Stock Status: NONSTOCK
- Brand: 3M™
- Manufacturer: 3M™
- Conductor Size: 8 to 4 AWG, 10 to 4 AWG
- Splice Length: 7 to 8 in
- Voltage Rating: 5 to 8 kV
3M 5300 Series Motor Lead Pigtail Splice Kit is perfect to use with copper compression lugs. This shielded and non-shielded splice kit is suitable for splicing motor lead cables to the incoming feeder cables. This kit is rated for 5/8 kV-rated applications.
- Compliance Cert URL - Scotch_054007_10083_Compliance_Certificate.pdf(Compliance Cert URL)
- http://www.3m.com(Seller Home Page URL)
- Install Instructions 1 URL - 11579_03XBJEG6IQ7NLAKP.pdf(Install Instructions 1 URL)
- Install Instructions URL - motor-lead-pigtail-splice-5320-series.pdf(Install Instructions URL)
- Safety Data Sheet URL - s51mffhyzlptyjpbwy40.pdf(Safety Data Sheet URL)
- Spec Sheet URL - 11579_18575.pdf(Spec Sheet URL)
- Tech Drawing URL - 11579_E8BRI3Y4APJ1ULD7.pdf(Tech Drawing URL)
- Features
| Fast and simple installation |
| No torches or heat source required |
| No special tools required to install splice |
| Thick walls to resist puncture and abrasion damage |
| High dielectric constant stress control included with 5/8 kV kits for shielded feeder cables for minimizing size and electrical stress |
| Easy re-entry, can be used on cables with a rated operating temperature of 90 deg C and an emergency overload rating of 130 deg C, to splice (insulate and seal) motor lead connections for 1000 V and less cables sized 16 AWG to 500 Kcmil |
| Suitable for use with 30000 Series copper compression lugs or other UL Listed copper lugs |
| 365 V/MIL dielectric strength |
| 750% elongation |
| 1400 PSI tensile strength |
| 1/2 in maximum bolt length |
| Polyethylene cable |