3M™ 5300 Pigtail Motor Lead Splice Kit, 5/8 kVAC, 4 to 1/0 AWG Conductor, 8 to 9 in L Splice, EPDM
Insulated Splice Kit, 5-8 kV
69636
MFG #: 7000006042
3M™
443.57000
/ ea
- Alternate Catalog Number: 5322
- ARRA Compliant: X
- Buy American Compliant: X
- Cable Type: Tape Shield/Unshielded/Wire Shield
- Catalog Number: 7000006042
- Color: Black
- Connector Type: Pigtail
- Country of Origin: US
- Currency: USD
- Dimensions: 9 in L
- EU RoHS Indicator: Y
- Expiry|Spoilage Date Applicable Indicator: Y
- Gross Weight Per Pack: 3.2000 lb
- Gross Weight per Pack Metric: 1.45
- Gross Weight UOM Metric: kg
- Harmonization Tariff Schedule Code: 8546900000
- Height: 6.00 in
- Height [Metric]: 15.2400 cm
- Insulation Size: 0.43 to 0.65 in OD
- Length: 16.10 in
- Length [Metric]: 40.8940 cm
- Material Composition Declaration: RoHS 2011/65/EU compliant without exemption
- Operating Temperature: 90°C
- Returnable: Y
- Series: 5300
- Standards: ARRA CompliantRoHS 2011/65/EUCSA Certified
- Temperature Rating: 90 to 130 °C
- Type: Motor Lead Pigtail Splice
- UNSPSC: 31270000
- UPC 11: 05400712272
- UPC 12: 054007122722
- Width: 7.50 in
- Width [Metric]: 19.0500 cm
- Stock Status: NONSTOCK
- Brand: 3M™
- Manufacturer: 3M™
- Conductor Size: 4 to 1/0 AWG
- Material: EPDM
- Splice Length: 8 to 9 in
- Voltage Rating: 5/8 kVA
3M 5300 Series Motor Lead Pigtail Splice Kit is perfect to use with copper compression lugs. This shielded and non-shielded splice kit is suitable for splicing motor lead cables to the incoming feeder cables. This kit is rated for 5/8 kV-rated applications.
- Compliance Cert URL - Scotch_054007_10083_Compliance_Certificate.pdf(Compliance Cert URL)
- http://www.3m.com(Seller Home Page URL)
- Install Instructions 1 URL - 11579_03XBJEG6IQ7NLAKP.pdf(Install Instructions 1 URL)
- Install Instructions 1 URL - motor-lead-pigtail-splice-5320-series.pdf(Install Instructions 1 URL)
- Install Instructions URL - motor-lead-pigtail-splice-5320-series.pdf(Install Instructions URL)
- Line Drawing URL(Line Drawing URL)
- Safety Data Sheet URL - xqfghmkj79kto4bmudvm.pdf(Safety Data Sheet URL)
- Seller Home Page URL - Country(Seller Home Page URL)
- Spec Sheet URL - 11579_18575.pdf(Spec Sheet URL)
- Spec Sheet URL - motor-lead-splicing-kits-5300-series.pdf(Spec Sheet URL)
- Tech Drawing URL - 11579_E8BRI3Y4APJ1ULD7.pdf(Tech Drawing URL)
- Tech Drawing URL - mediawebserver?mwsId=sssss72sFWtTz8Uun890Py_sFWuRFWtsFWtsFWtsFssssss--(Tech Drawing URL)
- Features
| Fast and simple installation |
| No torches or heat source required |
| No special tools required to install splice |
| THK walls to resist puncture and abrasion damage |
| High dielectric constant stress control included with 5/8 kV kits for shielded feeder cables for minimizing size and electrical stress |
| Easy re-entry, can be used on cables with a rated operating temperature of 90 deg C and an emergency overload rating of 130 deg C, to splice (insulate and seal) motor lead connections for 1000 VAC and less cables sized 16 AWG to 500 kcmil |
| Suitable for use with 30000 Series copper compression lugs or other UL listed copper lugs |
| 365 V mil dielectric strength |
| 750% elongation |
| 1400 psi tensile strength |
| 1 in maximum bolt length |
| Polyethylene cable |