3M™ 5500 Cold Shrink Splice Kit, 15 kVAC, 0.6 in Dia Cable, 2 to 1 AWG Stranded Conductor, 9 in L Splice, EPDM Rubber
Insulated Splice Kit, 15 kV
494462
MFG #: 7010305546
3M™
448.55000
/ ea
- Alternate Catalog Number: 5501-CI-21
- ARRA Compliant: X
- Buy American Compliant: X
- Cable Type: Tape Shield/UniShield®/Wire Shield
- Catalog Number: 7010305546
- Color: Black
- Connector: CI-21
- Connector Type: In-Line
- Country of Origin: US
- Currency: USD
- Dimensions: 1.76 in Dia
- EU RoHS Indicator: C
- Expiry|Spoilage Date Applicable Indicator: Y
- Gross Weight Per Pack: 2.8000 lb
- Gross Weight per Pack Metric: 1.27
- Gross Weight UOM Metric: kg
- Harmonization Tariff Schedule Code: 8546900000
- Height: 5.00 in
- Height [Metric]: 12.7000 cm
- Insulation Size: 0.637 to 0.9 in OD
- Length: 14.20 in
- Length [Metric]: 36.0680 cm
- Material Composition Declaration: Contact 3M for information
- Number Of Conductors: 1
- Returnable: Y
- Series: 5500
- Standards: ARRA CompliantBuy American Act CompliantRoHS CompliantIEEE 404
- Type: Cold Shrink
- UNSPSC: 26121600
- UPC 11: 05400709628
- UPC 12: 054007096283
- Width: 6.50 in
- Width [Metric]: 16.5100 cm
- Stock Status: NONSTOCK
- Brand: 3M™
- Manufacturer: 3M™
- Cable Diameter: 0.6 in
- Conductor Size: 2 to 1 AWG, 1 AWG, 1/0 AWG
- Material: EPDM Rubber
- Splice Length: 9 in
- Voltage Rating: 15 kV
3M 5500 Series Molded Rubber QS-II Splice Kit is an inline splice designed to use on 15kV tape shield, wire shield, or UniShield® cables with copper or aluminum conductors. Its peroxide-cured EPDM rubber construction ensures a long life. The continuous current rating of each splice is the same as the current rating of the cable that it is sized to accommodate.
- Compliance Cert URL - Scotch_054007_10083_Compliance_Certificate.pdf(Compliance Cert URL)
- http://www.3m.com(Seller Home Page URL)
- Install Instructions 1 URL - 11579_TB3YFCZGM8LS9WH1.pdf(Install Instructions 1 URL)
- Install Instructions 1 URL - 5501-5502-inline-splicing-kits.pdf(Install Instructions 1 URL)
- Install Instructions URL - 5501-5502-inline-splicing-kits.pdf(Install Instructions URL)
- Line Drawing URL(Line Drawing URL)
- Safety Data Sheet URL - wmfrqcnbdmsicrtitbeu.pdf(Safety Data Sheet URL)
- Seller Home Page URL - Country(Seller Home Page URL)
- Tech Drawing URL - 11579_72I4V3C6UXGFMTOJ.pdf(Tech Drawing URL)
- Tech Drawing URL - mediawebserver?mwsId=SSSSSufSevTsZxtUNx_B48fSevUqevTSevTSevTSeSSSSSS--(Tech Drawing URL)
- Features
| In-line splice to use on tape shield, wire shield, or UniShield® cables |
| Designed for direct burial installations, indoor and outdoor applications |
| Peroxide-cured EPDM rubber construction provides physical protection |
| Factory tested to offer reliability |
| No soldering required, minimum amount of taping, no special tools required to install, immediately energizable |
| For use with solid dielectric cables, polyethylene (high and low density) cross-linked polyethylene (XLP) and ethylene propylene rubber (EPR) |
| Polyolefin foam, copper conductor |
| Accommodates 2 to 1 AWG stranded and 1 to 1/0 AWG solid copper or aluminum conductors |
| 1400 PSI tensile strength |
| 750% elongation |
| 365 V/mil dielectric strength |
| 1/Case |