Shrink-Kon® HS12-6L HS Series Heat Shrink Tubing With Thermoplastic Adhesive Liner, 0.51 in ID Expanded, 0.16 in ID Recovered
Heat Shrink Tubing
36672
MFG #: HS12-6L
Shrink-Kon®
1323.55000
/ ea
- Alternate Catalog Number: 7TAA017090R0000
- ARRA Compliant: C
- Buy American Compliant: C
- Catalog Number: HS12-6L
- Country of Origin: CA
- Currency: USD
- EU RoHS Indicator: C
- Gross Weight Per Pack: 0.0200 lb
- Gross Weight per Pack Metric: 0.27
- Gross Weight UOM Metric: kg
- Harmonization Tariff Schedule Code: 3926909985
- Height: 6.00 in
- Height [Metric]: 15.2400 cm
- Item Group: 01709
- Item Group 2: 017
- Length [Metric]: 15.2400 cm
- Returnable: Y
- Series: HS Series
- Shrink Ratio: 3:1
- Shrink Temperature: 120 °C
- Standards: UL Listed, CSA Certified, ANSI, ICEA, NEMA, RoHS Compliant
- Temperature Rating: -55 to 110 °C
- Type: Heavy-Wall Heat Shrinkable Tubing
- UNSPSC: 39121723
- UPC 11: 78621087856
- UPC 12: 786210878560
- Voltage Rating: 600 VAC
- Wall Type: Heavy Duty
- Width: 6.00 in
- Width [Metric]: 15.2400 cm
- Wire Size: 8 to 6 AWG
- Stock Status: NORMALLY STOCKED
- Brand: Shrink-Kon®
- Manufacturer: Thomas & Betts
- Color: Black
- Inner Diameter Expanded: 0.51 in
- Inner Diameter Recovered: 0.16 in
- Length: 6.00 in
- Material: Polyolefin
- Wall Thickness Recovered: 0.09 in
When it comes to moisture-proofing connections and terminations, T&B's heat-shrinkable tubing, boots, and end caps have proven themselves over years of service to the industry. Made of thermally stabilized cross-linked polyolefin, these heat-shrinkable insulators can be used over lead, steel, aluminum, copper, standard plastic, and elastomeric insulating materials. T&B heat-shrinkable insulators are designed to be easy to use. They provide an appropriate level of insulation and abrasion protection.
- http://www.TNB.com(Seller Home Page URL)
- Safety Data Sheet URL - SDS-00046-TB2.pdf(Safety Data Sheet URL)
- Spec Sheet 1 URL - IDW_Shrink_Kon_HS12_6L_Specification_Sheet.pdf(Spec Sheet 1 URL)
- Spec Sheet URL - WSD-000473.pdf(Spec Sheet URL)
- Tech Drawing 1 URL - T&B_HS12_6_Technical_Drawing_Sheet.pdf(Tech Drawing 1 URL)
- Tech Drawing URL - T&B_HS12_6_Technical_Drawing_Sheet.pdf(Tech Drawing URL)
- Features
| Made of thermally stabilized cross-linked polyolefin, enabling a recovered wall thickenss greater than that of the cable jacket replaced. |
| Made of thermally stabilized cross linked polyolefin, enabling a recovered wall thickness greater than that of the cable jacket replaced |
| Withstands severe mechanical requirements of U.R.D., submersible and direct burial installations |
| Tubing, featuring an internally applied sealant, offers protection against moisture, and may be used over lead, steel, aluminum, copper, standard plastic and elastomeric insulating materials |
| High impact, abrasion, corrosion and chemical-resistant |
| Thermoplastic adhesive liner provides complete environmental protection and insulation |
| 500 V/mil (20 kV/mm) dielectric strength |
| 0.1% water absorption |
| Made of Cross-Linked Polyolefin |