Milwaukee® 6890 Double Insulated Electric Nibbler, 1-3/4 in 18 ga Stainless Steel, 16 ga Steel Cutting, 1900 spm
Electric Nibblers
949227
MFG #: 6890
Milwaukee®
707.52000
/ ea
- Alternate Catalog Number: 6890
- Amperage Rating: 4 A
- ARRA Compliant: C
- Buy American Compliant: C
- Catalog Number: 6890
- Control Type: Paddle Switch
- Cord Type: 8 ft Fixed
- Country of Origin: CHN
- Currency: USD
- EU RoHS Indicator: C
- Gross Volume Per Pack: 6.37
- Gross Weight Per Pack: 6.2000 lb
- Gross Weight per Pack Metric: 2.81
- Gross Weight UOM Metric: kg
- Harmonization Tariff Schedule Code: 8467290085
- Height: 3.3000 in
- Height [Metric]: 33.655 cm
- Length: 14.0000 in
- Length [Metric]: 7.7724 cm
- Material: Metal
- Standards: ARRA CompliantBuy American Act CompliantUL ListedETL ListedCSA Certified
- Type: Corded Double Insulated
- UNSPSC: 27111521
- UPC 11: 04524205960
- UPC 12: 045242059607
- Warranty Description: 5 Years
- Width: 7.00 in
- Width [Metric]: 17.78 cm
- Stock Status: NONSTOCK
- Brand: Milwaukee®
- Manufacturer: Milwaukee Tool
- Cutting Capacity: 16 ga Steel, 18 ga Stainless Steel
- Tool|Kit: Bare Tool
- Cutting Radius: 1-3/4 in
- Housing Material: Metal
- Overall Length: 11-1/4 in
- Strokes per Minute: 1900 spm
- Voltage Rating: 120 VAC//VDC
A nibbler uses a punch and die to make the cut, this is perfect for tight radius cuts into steel. The cutter can be set in 8 positions to make cutting easier. A. 87 in starter hole is all that is needed to start or start from the edge of the material. A nibbler is also what you need if you are cutting corrugated metal. The 6890 nibbler can cut 16 gauge steel and 18 gauge stainless.
- https://www.milwaukeetool.com(Seller Home Page URL)
- Install Instructions URL - ID-INS-v1-6890.pdf(Install Instructions URL)
- Line Drawing URL - Milwaukee_6890_Line_Drawing.pdf(Line Drawing URL)
- Spec Sheet URL - ProductDetail.aspx?ProductId=6890&CategoryName=SC%3a+Shears%2fNibblers(Spec Sheet URL)
- Warranty URL - Warranty(Warranty URL)
- Features
| Cuts up to 7 ft/min |
| A 0.87 in starter hole is all that is needed to start or start from the edge of the material |
| AC-DC paddle switch |
| A nibbler uses a punch and die to make the cut, this is perfect for tight radius cuts into steel |
| The cutter can be set in 8 positions to make cutting easier |