Greenlee® 6906 Ultra Tugger® 6900 Heavy Duty Cable Puller Package With Mobile VersiBoom™ II, 6500 to 10000 lb, 7/8 in
Cable Pullers - Powered
676577
MFG #: 6906
Greenlee®
12861.79000
/ ea
- Amperage Rating: 20 A
- ARRA Compliant: Y
- Buy American Compliant: X
- Cable Type: Electrical Cable
- Catalog Number: 6906
- Country of Origin: US
- Currency: USD
- Dimensions: 11-1/2 in L x 26 in W x 6-3/4 in H
- EU RoHS Indicator: U
- Gross Volume Per Pack: 128191.60
- Gross Volume per Pack Metric: 2100688.58
- Gross Volume UOM: CI
- Gross Volume UOM Metric: cm3
- Gross Weight Per Pack: 468.0000 lb
- Gross Weight per Pack Metric: 212.28
- Gross Weight UOM Metric: kg
- Harmonization Tariff Schedule Code: 8425310100
- Height: 36.10 in
- Height [Metric]: 91.6940 cm
- Length: 67.00 in
- Length [Metric]: 170.1800 cm
- Load: 0 - 6500.000 LB (0 - 28.900 KN) Continuous Operation, 6500.000 - 8000.000 LB (28.900 - 35.600 KN) 15 Minutes ON/15 Minutes OFF, 8000.000 - 10000.000 LB (35.600 - 44.500 KN) Momentary
- Load Rating: 0 to 6500 lb
- Mounting: Mobile versi Boom
- Number of Pulling Speeds: 5
- Power Rating: 1-1/2 hp
- Prime Mover Specification: Required Rope: 7/8" diameter, double-braided, polyester composite
- Series: 6900
- Standards: ARRA CompliantUL ListedcUL Listed
- Sub Brand: Ultra Tugger
- Type: Double Braided Heavy Duty
- UNSPSC: 39121722
- UPC 11: 78331000359
- UPC 12: 783310003595
- Voltage Rating: 115 V
- Width: 53.00 in
- Width [Metric]: 134.6200 cm
- Stock Status: NONSTOCK
- Brand: Greenlee®
- Manufacturer: Greenlee Textron
- Bare Tool|Kit: Bare Tool
- Cable Diameter: 7/8 in
- Material: Polyester Composite
- Pulling Capacity: 6500 to 10000 lb
- Pulling Speed: 16 fpm at No Load
Greenlee® Ultra Tugger® Cable Puller Package, Heavy Duty, Bare Tool, Series: 6900, 6500 to 10000 lb Pulling, 5 Pulling Speeds, 16 fpm at No Load Pulling, 7/8 in Cable Dia, Load Rating: 32000 lb, 120 VAC, 20 A, 1-1/2 hp, 11-1/2 in L x 26 in W x 6-3/4 in H
- Catalog URL - IDW_DOCUMENT_1511873498783.pdf(Catalog URL)
- http://www.greenlee.com(Seller Home Page URL)
- http://www.greenlee.com/(Seller Home Page URL)
- Install Instructions URL - ID-INS-v1-93189dd27c5c3221f5687b74bcba0ab6.pdf(Install Instructions URL)
- Safety Data Sheet URL - ?f05bad6d-5855-11e4-bc08-c81f66f24c6b(Safety Data Sheet URL)
- Spec Sheet URL - 783310003595(Spec Sheet URL)
- Video - https://youtube.com/embed/-xbgGWan2Dg(Video)
- Features
| 2 Speed Ultra Tugger (UT10-2S) is a one-stop-shop: The only 2 speed puller on the market that can shift from high speed/low load pulling to low speed/high load pulling with a simple double tap motion on the foot pedal control switch. Use for cable pulls requiring high as well as low pulling loads. The no-load high speed is 16 FT/MINT and is best suited for loads up to 4000 LB where the speed will be 12 FT/MINT. The no-load low speed is 9 FT/MINT and can be used on loads up to 8000 LB where the speed will be 6 FT/MINT, or a momentary peak capacity of 10000LB. 2-Speed motor that delivers the fastest pulling time for all pulling needs over the widest (10000 LB) range. Strong, rugged motor designed specifically for both big and small cable pulling applications up to 10000 LB. Easy control features for increased productivity: On-board force gauge provides visual communication of pulling force and speed changes. Quick speed change from high speed to low-speed by simply double tapping foot pedal. Removable foot pedal for convenience. Sets up in less than 2 minutes and can be used in every pulling situation. This combination of speed and versatility can increase your productivity, equaling more pulls in a day and delivering greater benefit to your bottom line |
| 2-speed ultra Tugger® (UT10-2S) is a one-stop-shop - the only 2-speed puller on the market that can shift from high speed/low load pulling to low speed/high load pulling with a simple double tap motion on the foot pedal control switch |
| Use for cable pulls requiring high as well as low pulling loads |
| The no load high speed is 16 ft/min and is best suited for loads up to 4000 lb where the speed will be 12 ft/min |
| The no load low speed is 9 ft/m and can be used on loads up to 8000 lb where the speed will be 6 ft/m or a momentary peak capacity of 10000 lb |
| 2-speed motor that delivers the fastest pulling time for all pulling needs over the widest 10000 lb range |
| Strong, rugged motor designed specifically for both big and small cable pulling applications up to 10000 lb |
| Easy control features for increased productivity, on-board force gauge provides visual communication of pulling force and speed changes |
| Quick speed change from high speed to low speed by simply double tapping foot pedal |
| Removable foot pedal for convenience |
| Sets up in less than 2 min and can be used in every pulling situation |
| This combination of speed and versatility can increase your productivity, equaling more pulls in a day and delivering greater benefit to your bottom line |
| Double braided polyester composite rope |
| 14 ft/min at 2000 lb, 12 ft/min at 4000 lb, 7 ft/min at 6000 lb and 6 ft/min at 8000 lb pulling speed |
| On-board force gauge provides visual communication of pulling force and speed changes easy control features for increased productivity |
| 6500 to 8000 lb (28.9 to 35.6 KN) 15 min on/15 min OFF, 8000 to 10000 lb (35.6 to 44.5 KN) momentary |