Greenlee® Slug-Buster® 126AV Round Replacement Die, 1 in, Steel, 10 ga
Knockout Dies
23657
MFG #: 126AV
Greenlee®
28.22000
/ ea
- Application: Use with battery-powered, hydraulic, ratchet or manual drivers. Capacity up to 10 gauge mild steel. Use on mild steel, aluminum, fiberglass and plastic.
- ARRA Compliant: Y
- Buy American Compliant: X
- Catalog Number: 126AV
- Country of Origin: US
- Currency: USD
- EU RoHS Indicator: U
- Gross Volume Per Pack: 31.50
- Gross Volume per Pack Metric: 516.19
- Gross Weight Per Pack: 1.4500 lb
- Gross Weight per Pack Metric: 0.66
- Harmonization Tariff Schedule Code: 8207303020
- Height: 6.00
- Height [Metric]: 15.2400
- Length: 2.10
- Length [Metric]: 5.3340
- Size: Replacement Die for 1-11/16 In Standard Round Knockout
- Standards: ARRA Compliant
- Suitable For Use With: 1.362 in Actual Hole Standard Round Knockout Punch Unit, Battery Powered/Hydraulic Ratchet or Manual Driver
- Type: Replacement Die for standard round knockout punches
- UNSPSC: 27111505
- UPC 11: 78331004011
- UPC 12: 78331004011
- Width: 2.50
- Width [Metric]: 6.3500
- Stock Status: NORMALLY STOCKED
- Brand: Greenlee®
- Manufacturer: Greenlee Textron
- Gauge: 10 ga
- Material: Mild Steel
- Punch Type: Standard Round
Greenlee® Slug-Buster® Replacement Die, Round, 1 in, Steel, 10 ga, For Use With: Standard Round Knockout Punch Unit
- http://www.greenlee.com(Seller Home Page URL)
- http://www.greenlee.com/(Seller Home Page URL)
- Install Instructions URL - ID-INS-v1-93189dd27c5c3221f5687b74bcba0ab6.pdf(Install Instructions URL)
- Safety Data Sheet URL - ?f05bad6d-5855-11e4-bc08-c81f66f24c6b(Safety Data Sheet URL)
- Spec Sheet URL - 11142_ID-SPE-v1-abh27dfpvljpjconrned.pdf(Spec Sheet URL)
- Spec Sheet URL - abh27dfpvljpjconrned.pdf(Spec Sheet URL)
- Applications
- Features
| Use with battery-powered, hydraulic, ratchet or manual drivers. Capacity up to 10 gauge mild steel. Use on mild steel, aluminum, fiberglass and plastic. |
| Save time and ensure accuracy |
| Self-centering punch aligns itself on pilot hole |
| No need to draw cross hairs or line up die alignment marks |
| Unique, patent pending punch profile also splits slugs for easier slug removal |
| Alignment markings improve punching accuracy and productivity when making holes |
| Punches and dies are marked with catalog numbers and sizes for quick part identification |
| Replacement die for 1-11/16 in standard round knockout |