Bogen® GS250 Gold Seal PA Amplifier, 120 VAC, -60/70/94 dB SNR

PA System Amplifiers
PDW~6740605 MFG #: GS250
Bogen®
1496.36000 / ea
IDW_Bogen_GS250
  • Catalog Number: GS250
  • Country of Origin: CN
  • Dimensions: 16-1/2 IN Width x 3-1/2 IN Height x 12 IN Depth
  • Distortion: Direct: 0.5 PCT (Maximum), 0.3 PCT (Typical), 20 HZ - 20 KHZ, Transformer: 0.5 PCT (Maximum), 0.3 PCT (Typical), 65 HZ - 20 KHZ At -2 DB
  • Frequency Response: Transformer: 65 HZ - 20 KHZ, +0/-2 DB At -2 DB, Direct: 20 HZ - 20 KHZ, +0/-1 DB At Rated Power
  • Gross Weight Per Pack: 1 lb
  • Standards: UL/cUS 60065 Listed, RoHS Compliant
  • Sub Brand: Gold Seal Series
  • Type: Public Address Amplifier
  • UNSPSC: 52161547
  • UPC 11: 76536834050
  • Stock Status: NONSTOCK
  • Brand: Bogen®
  • Manufacturer: Bogen Communications, Inc.
The Bogen Gold Seal Series amplifiers were designed with the sound contractor in mind. They provide extensive flexibility and versatility, without the need for add-on modules. The GS250 model enhances the Gold Seal Series line with 250 watts of power in the same 2 rack space package as the other Gold Seal Series amplifiers.
QTY
Add to Wishlist
  • Features
Provide extensive flexibility and versatility, without the need for add-on modules ; 4 dedicated MIC inputs ; 1 selectable MIC/TEL input ; 1 selectable MIC/AUX input ; 1 dedicated AUX input ; 4-ohm direct coupled output ; 8-ohm, 25V, 25VCT, and 70V transformer coupled outputs ; Rack mountable - 2RU package ; Dual-function, 10-band graphic equalizer (Acoustic EQ or FeeDBack Control modes) ; True loudness contour function ; Audio Enhancement circuit for improved intelligibility ; Switchable phantom power supply (15V DC) ; Variable AUX input muting ; Remote master volume control capability ; Automatic level control ; Input muting via contact on all inputs ; Voice activated AUX muting on TEL input ; AUX fade back after TEL page ; Pre-amp Out/Power amp In (insert) connections ; Booster amp output connection ; Tape output connection ; Balanced line driver output (using WMT1A accessory) ; Low-cut filter for MIC channels ; 3-Speed fan cooling ; Thermal and overload protection ; Tamper-resistant front cover available (GSTRC) ; Rack mounting kit available (GSRPK) ; Remote volume control available (GSRVC) ; Dual Sound EQ (10 band +/-12 DB): Acoustic Mode: 62.5 Hz, 125, 250, 500, 1 kHz, 2, 4, 8, 12, 16, FeeDBack Mode: 125 Hz, 200, 315, 500, 800, 1.2 kHz, 2, 3.1, 5, 8 ; Dual Sound EQ (10 band +/-12 DB): Acoustic Mode- 62.5 Hz, 125, 250, 500, 1 kHz, 2, 4, 8, 12, 16, FeeDBack Mode-125 Hz, 200, 315, 500, 800, 1.2 kHz, 2, 3.1, 5, 8 ; Variable Mute Range: 4 steps -60, -21, -10, 0 DB (AUX 1 & 2) ; ALC: Distortion-less than 0.5%, Compression-25 DB (TEL) ; VOXThreshold: TEL Input-20mV (VOX control max. CW position) ; MIC Precedence: Via terminal strip -60 DB: MIC 1, 2, 3, 5/TEL 6/AUX 1, AUX 2 ; Loudness Contour: +8 DB @ 100 Hz, +4 DB @ 10 kHz (AUX 1 & 2 control at 1/4 CWposition) ; Audio Enhancement: Type A9 ; Overload Protection: Electronic with automatic reset ; Thermal Protection: Thermistor attached to heat sink ; Line Fusing: 7A/125V AC Slo-Blo
847 BTU/HR, 5.0 A AC thermal emission
> 2 dB from no load to full load output regulation
4 steps: -60, -21, -10, 0 dB (AUX 1 & 2) variable mute range
Type A9 audio enhancement
Electronic with automatic reset overload protection
65 Hz - 20 kHz at -2 dB Transformer, 20 Hz - 20 kHz at +0/-1 dB Direct Output
480 W Consumption
-94 dB, AUX 1 & 2: -70 dB, TEL: -70 dB or better at 600 Ohm, MIC 1 to 6: -60 dB or better at 200 Ohm
250 W RMS
60 Hz frequency