Kidde® 21007915 Tamper Resistant Smoke Detector Alarm, 10 ft Range, 120 VAC with 9 VDC Battery Backup, 85 dB

Smoke Detector Alarms
594169 MFG #: PI2010
Kidde®
81.57000 / ea
  • Alarm Type: Audio
  • Catalog Number: PI2010
  • Color: White
  • Country of Origin: USA
  • Dimensions: 5.75 in Dia x 1.8 in D
  • Gross Weight Per Pack: 1 lb
  • Humidity Rating: 85%
  • Interconnection Capability: Up to 24 Devices
  • Material: Plastic
  • Operating Temperature: 40 to 100 °F
  • Standards: Meet the Requirements of UL 217NFPA72NFPA101Federal Housing Authority (FHA)Housing and Urban Development (HUD)
  • Type: Tamper-Resistant
  • UNSPSC: 46191505
  • UPC 11: 04787107915
  • UPC 12: 04787107915
  • Visual Alert: Red LED
  • Wiring Type: Pre-Stripped Wire Lead
  • Stock Status: NONSTOCK
  • Brand: Kidde®
  • Manufacturer: Kidde (A Carrier Company)
  • Audible Alert: 85 dB
  • Detection Range: 10 ft
  • Power Source: 120 VAC with 9 VDC Battery Backup
  • Sensor Type: Dual Ionization/Photoelectric
The Kidde PI2010 is a 120VAC, wire-in smoke alarm with 9V battery backup. This smoke alarm functions as a stand alone unit or in an interconnected system. The Kidde PI2010 features Hush®, allowing you to quickly silence nuisance alarms and also includes a tamper resist features that deters tampering and theft. The PI2010 includes a quick connect power harness that allows for quick and easy installation. This smoke alarm combines both photoelectric and ionization sensors. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home. The Kidde PI2010, 120VAC, wire-in smoke alarm with 9V battery back up provides continuous protection against smoke and fire hazards, even during power outages. The Kidde PI2010 interconnects with up to 24 Kidde devices of which 18 can be initiating. This unit also includes flashing LEDs to signal the alarm is functioning properly, a low battery warning and a loud 85dB alarm. The Kidde PI2010 is UL Listed and includes a 10-year limited warranty.
QTY
  • Features
This smoke alarm functions as a stand alone unit or in an interconnected system; Allowing you to quickly silence nuisance alarms and also includes a tamper resist features that deters tampering and theft, the PI2010 includes a quick connect power harness that allows for quick and easy installation; This smoke alarm combines both photoelectric and ionization sensors, ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms, photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms; The Kidde PI2010 interconnects with up to 24 Kidde devices of which 18 can be initiating, this unit also includes flashing LEDs to signal the alarm is functioning properly; Ionization sensor: May detect invisible fire particles (associated with flaming f
Contains both a photoelectric and ionization sensor
Ionization sensor may detect invisible fire
Photoelectric sensor may detect visible particles
Hush® temporarily silences nuisance alarms
The right alarm, the right location each of the four smoke alarms includes features designed to address location specific safety needs, such as an LED light in the hallway
Interconnect interconnects with up to 24 Kidde devices on one wiring network of which 18 can be initiating
Battery backup (9 VDC battery included) provides continuous protection even during power outages
Tamper-resistant deters from tampering or theft
Red LED flashes every 30 to 40 s to indicate that the smoke alarm is operating
Test/reset button tests smoke alarm circuitry and horn
The Kidde® PI2010 interconnects with up to 24 Kidde® devices of which 18 can be initiating, this unit also includes flashing LEDs to signal the alarm is functioning properly
6-strobe lights/relay module