or to view stock quantity and your pricing.
Steiner serves territories in Northern Illinois, Northwest Indiana and Southern Wisconsin. Please for assistance if outside our sales territory.
Dynabrade®
Fastcut 23262 M14X2 D7 3F P SP MET.
Dynabrade®
Fastcut 23262 M14X2 D7 3F P SP MET.
SKU588251
MFGR #23262
Your Cost: $50.54/ea
List: Spiral point plug tap has m14 x 2 thread size and 3 high speed steel flutes
Spiral point plug tap has m14 x 2 thread size and 3 high speed steel flutes
Catalog Number 23262 Class of Fit D7 Size M14 x 2 Through Coolant No Type Spiral Point Plug Tap UPC 11 66289023262 UPC 12 66289023262 Stock Status NONSTOCK Brand Dynabrade® Cutting Direction Fastcut Material High Speed Steel Material Application Mild Steel;Aluminum;Magnesium;Copper;Brass Number of Flutes 3 Thread Limit D7 Thread Size M14 x 2 These taps are primarily designed for tapping through holes, however, they can also be used in blind holes which are deep enough to allow for chip accumulation in the bottom of the hole. The spiral point forces the chips ahead of the tap, thereby preventing clogging and recutting of chips. Long holes, in excess of 1-½ diameters, can be tapped as a result. They can be used by hand or under power and are suitable for tapping most materials, especially those with high ductility.
content loaded
content loaded
content loaded
content loaded
- Attributes
- Documents & Resources
- Features
- Substitute Products
| Catalog Number | 23262 |
| Class of Fit | D7 |
| Size | M14 x 2 |
| Through Coolant | No |
| Type | Spiral Point Plug Tap |
| UPC 11 | 66289023262 |
| UPC 12 | 66289023262 |
| Stock Status | NONSTOCK |
| Brand | Dynabrade® |
| Cutting Direction | Fastcut |
| Material | High Speed Steel |
| Material Application | Mild Steel;Aluminum;Magnesium;Copper;Brass |
| Number of Flutes | 3 |
| Thread Limit | D7 |
| Thread Size | M14 x 2 |
| These taps are primarily designed for tapping through holes, however, they can also be used in blind holes which are deep enough to allow for chip accumulation in the bottom of the hole. The spiral point forces the chips ahead of the tap, thereby preventing clogging and recutting of chips. Long holes, in excess of 1-½ diameters, can be tapped as a result. They can be used by hand or under power and are suitable for tapping most materials, especially those with high ductility. |