Valenite Tiger-tec® Silver 7021463 Double Sided Negative Turning Insert, VNGG3(3)0.5-MS3 WSM01 ANSI, Rhombic, Carbide
VNGG Turning Inserts
1151980
MFG #: VNGG3(3)0.5-MS3WSM01
Walter (Valentine)
49.23000
/ ea
- ANSI Code: VNGG3(3)0.5-MS3 WSM01
- Catalog Number: VNGG3(3)0.5-MS3WSM01
- Corner Radius: 0.2 mm
- Finish: PVD-TiAlN (HIPIMS) Coated
- For Use On: Heat Resistant Special Alloys Based on Iron, Nickel and Cobalt, Titanium and Titanium Alloys, Austenitic Stainless Steel, Austenitic-Ferritic Steel and Steel Casting
- Gross Weight Per Pack: 0.0100 lb
- Included Angle: 35 °
- ISO Code: VNGG160402-MS3 WSM01
- Relief Angle: 0 °
- Series: Tiger-tec® Silver
- Sub Brand: Tiger-tec®
- Thickness: 4.76 mm
- Stock Status: NONSTOCK
- Brand: Walter (Valentine)
- Manufacturer: Walter
- Chipbreaker: MS3
- Cutting Direction: Neutral
- Inscribed Circle: 9.525 mm
- Insert Size: 3(3)0.5
- Insert Style: VNGG
- Manufacturer's Grade: WSM01
- Material: Carbide
- Material Grade: M, S
- Maximum Depth of Cut: 2 mm
- Rake: Negative
- Seat Size: 16
- Shape: Rhombic
VALENITE Tiger-tec® Silver Turning Insert, Double Sided Negative, VNGG Insert, Rhombic, 2 mm Maximum Depth of Cut, 9.525 mm Inscribed Circle, 4.76 mm Thickness, MS3 Chipbreaker, 0.2 mm Corner Radius, Manufacturer's Grade: WSM01, ANSI Code: VNGG3(3)0.5-MS3 WSM01, ISO Code: VNGG160402-MS3 WSM01, 35 deg Included Angle, 0 deg Relief Angle, Carbide, PVD Coated, Material Grade: K/M/N/P/S
- Features
| MEGACOAT technology for extended tool life - excellent wear and heat resistance |
| Special carbide substrates - fracture resistance and stabilization |
| New edge preparation for PR13 series - low cutting forces for reduced shattering |
| MQ chipbreaker - large rake angle and circular edge line |
| Low cutting force and good chip control |
| PR1310 grade MEGACOAT on hard and superior heat resistant carbide, superior wear and oxidation resistance |
| First choice for continuous and light interrupted cutting and finishing of heat resistant alloys |
| +/-0.025 mm inscribed circle tolerance |
| 0.05 to 0.12 mm feed/rev |
| 16.6 mm cutting edge length |