Sandvik Coromant 5755933 CoroTurn® 107 Basic Shape Positive Turning Insert, VCGT 221-UM 1115, V-35 deg Diamond, 1115
VCGT Turning Inserts
1249022
MFG #: 5755933
Sandvik Coromant
28.97000
/ ea
- Alternate Catalog Number: VCGT 221-UM 1115
- ANSI Code: VCGT 221-UM 1115
- Catalog Number: 5755933
- Corner Radius: 0.0156 in
- Country of Origin: IN
- Finish: PVD Coated
- Gross Weight Per Pack: 0.0100 lb
- Hand of Insert: Neutral
- Hole Diameter: 0.1102 in
- Included Angle: 35 deg
- ISO Code: VCGT 11 03 04-UM 1115
- Item Group: 130
- Length: 0.4358 in
- Relief Angle: 7 deg
- Series: CoroTurn® 107
- Thickness: 1/8 in
- Type: Basic Shape Positive
- UPC 11: 69826247326
- Width: UM
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: UM
- Cutting Direction: Neutral
- For Use On: Heat Resistant Super Alloys and Stainless Steel
- Inscribed Circle: 1/4 in
- Insert Size: V - 35 deg Diamond
- Insert Style: VCGT
- Manufacturer's Grade: 1115
- Material: Carbide
- Material Grade: M/N/S
- Maximum Depth of Cut: 3 mm
- Rake: Positive
- Seat Size: 11
- Shape: V-35 deg Diamond
Sandvik Coromant Turning Insert, Basic Shape Positive, Series: CoroTurn® 107, VCGT Insert, V-35 deg Diamond, 3 mm Maximum Depth of Cut, 1/4 in Inscribed Circle, 1/8 in Thickness, 0.4358 in Length, UM Chipbreaker, 0.0156 in Corner Radius, 0.1102 in Hole Dia, Manufacturer's Grade: 1115, ANSI Code: VCGT 221-UM 1115, ISO Code: VCGT 11 03 04-UM 1115, 35 deg Included Angle, 7 deg Relief Angle, Neutral Hand, Carbide, PVD Coated, Material Grade: M/N/S
- Features
| 40 - 60 deg countersunk hole and non-flat surface clamping interface |
| 1-side cutting |
| +/-0.13 mm THK and +/-0.025 mm inscribed circle tolerance |
| Sharp cutting edge |
| Solid carbide is extremely heat-resistant and used for high speed applications on cast iron, non-ferrous materials, plastics and other tough-to-machine materials |
| For external machining of small, long, slender components and internal machining |
| The positive insert shape combines low cutting forces with good edge strength |
| The screw clamping ensures stability and unobstructed chip flow |
| 0.08 - 0.25 mm/r cutting feed |
| 20 life cycle state |