Sandvik Coromant 5755893 CoroTurn® 107 1-Sided Turning Insert, VCGT 220-UM 1025, V-35 deg Diamond, VCGT-UM Insert, 1025, Carbide
VCGT Turning Inserts
1249067
MFG #: 5755893
Sandvik Coromant
23.17000
/ ea
- ANSI Code: VCGT 220-UM 1025
- Catalog Number: 5755893
- Corner Radius: 0.0078 in
- Country of Origin: IN
- Finish: PVD Coated
- Gross Weight Per Pack: 1 lb
- Hand of Insert: Neutral
- Hole Diameter: 0.1102 in
- Included Angle: 35 deg
- ISO Code: VCGT 11 03 02-UM 1025
- Length: 0.4358 in
- Relief Angle: 7 deg
- Series: CoroTurn® 107
- Thickness: 1/8 in
- Type: 1-Sided
- UPC 11: 69826217966
- Width: 7 deg
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: UM
- Cutting Direction: Neutral
- For Use On: Cast Iron, Heat-Resistant Super Alloys, Non-Ferrous Metals, Stainless Steel and Steel
- Inscribed Circle: 1/4 in
- Insert Size: 3.175 mm
- Insert Style: VCGT-UM
- Manufacturer's Grade: 1025
- Material: Carbide
- Material Grade: S
- Maximum Depth of Cut: 0.5 mm
- Rake: Positive
- Seat Size: 11
- Shape: V-35 deg Diamond
Sandvik Coromant Turning Insert, 1-Sided, Series: CoroTurn® 107, VCGT-UM Insert, V-35 deg Diamond, 0.5 mm Maximum Depth of Cut, 1/4 in Inscribed Circle, 1/8 in Thickness, 0.4358 in Length, UM Chipbreaker, 0.0078 in Corner Radius, 0.1102 in Hole Dia, Manufacturer's Grade: 1025, ANSI Code: VCGT 220-UM 1025, ISO Code: VCGT 11 03 02-UM 1025, 35 deg Included Angle, 7 deg Relief Angle, Neutral Hand, Carbide, PVD Coated, Material Grade: S
- Features
7 deg major clearance |
F cutting edge condition |
2 cutting edges |
40 - 60 deg countersunk hole and non-flat surface clamping interface |
10.87 mm L effective cutting edge |
G tolerance class |
0.02 - 0.08 mm/r cutting feed |
30 life cycle state |
Sharp cutting edges and excellent chip control ensure a soft cutting action and low cutting forces, providing an excellent surface finish to the component |
7 deg clearance angle |
Screw clamping ensures stability and unobstructed chip flow |
Holders and insert geometries with conventional and CoroTurn HP design |
For longitudinal turning and profiling |
Positive rake |
Screw clamp mount |