Sandvik Coromant 6879551 CoroTurn® 107 1-Sided Turning Insert, VBGW221S0320F 7525, V-35 deg Diamond, VBGW..S/T..F Insert
VBGW Turning Inserts
1243585
MFG #: 6879551
Sandvik Coromant
96.71000
/ ea
- Alternate Catalog Number: VBGW221S0320F 7525
- ANSI Code: VBGW221S0320F 7525
- Catalog Number: 6879551
- Corner Radius: 0.0157 in
- Country of Origin: PL
- Finish: PVD Coated
- Gross Weight Per Pack: 6.6100 lb
- Hole Diameter: 0.1102 in
- Included Angle: 35 °
- ISO Code: VBGW110304S01020F 7525
- Item Group: 620
- Length: 0.4358 in
- Series: CoroTurn® 107
- Thickness: 1/8 in
- Type: 1-Sided
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Cutting Direction: Neutral
- For Use On: Hardened Steel
- Inscribed Circle: 1/4 in
- Insert Size: 221
- Insert Style: VBGW
- Manufacturer's Grade: 7525
- Material: Carbide
- Material Grade: H
- Maximum Depth of Cut: 0.008 in
- Rake: Positive
- Seat Size: 11
- Shape: Rhombic
Sandvik Coromant Turning Insert, 1-Sided, Series: CoroTurn® 107, VBGW..S/T..F Insert, V-35 deg Diamond, 0.1 mm Maximum Depth of Cut, 1/4 in Inscribed Circle, 1/8 in Thickness, 0.4358 in Length, 0.0157 in Corner Radius, 0.1102 in Hole Dia, Manufacturer's Grade: 7525, ANSI Code: VBGW221S0320F 7525, ISO Code: VBGW110304S01020F 7525, 35 deg Included Angle, Neutral Hand, Carbide, PVD Coated, Material Grade: H
- Features
| Chamfered and honed cutting edge |
| KBN25M grade heat resistant MEGACOAT on micrograin CBN with heat resistant binder phase |
| Stable cutting of hardened steel at high speed |
| 2 cutting edges |
| 40 - 60 deg countersunk hole and flat surface clamping interface |
| 0 deg insert rake |
| 20 deg face land |
| 2.5 mm L effective cutting edge |
| G tolerance class |
| 0.05 - 0.2 mm/r cutting feed |
| 20 life cycle state |
| Sharp cutting edges and excellent chip control ensure a soft cutting action and low cutting forces, providing an excellent surface finish to the component |
| 7 deg clearance angle |
| Screw clamping ensures stability and unobstructed chip flow |
| Holders and insert geometries with conventional and CoroTurn HP design |
| For longitudinal turning and profiling |