Sandvik Coromant 5755388 CoroTurn® 107 1-Sided Turning Insert, VBGT 331-UM 1025, V-35 deg Diamond, VBGT-UM Insert, 1025, Carbide
VBGT Turning Inserts
1248342
MFG #: 5755388
Sandvik Coromant
25.08000
/ ea
- ANSI Code: VBGT 331-UM 1025
- Catalog Number: 5755388
- Corner Radius: 0.0156 in
- Country of Origin: SE
- Finish: PVD Coated
- Gross Weight Per Pack: 0.0200 lb
- Hand of Insert: Neutral
- Hole Diameter: 0.1732 in
- Included Angle: 35 deg
- ISO Code: VBGT 16 04 04-UM 1025
- Length: 0.6537 in
- Relief Angle: 5 deg
- Series: CoroTurn® 107
- Thickness: 0.1874 in
- Type: 1-Sided
- UPC 11: 69826211779
- Width: UM
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: UM
- Cutting Direction: Neutral
- For Use On: Stainless Steel, Steel, Cast Iron and Heat-Resistant Super Alloys
- Inscribed Circle: 3/8 in
- Insert Size: VBGT-UM
- Insert Style: VBGT-UM
- Manufacturer's Grade: 1025
- Material: Carbide
- Material Grade: S
- Maximum Depth of Cut: 1.3 mm
- Rake: Positive
- Seat Size: 16
- Shape: V-35 deg Diamond
Sandvik Coromant Turning Insert, 1-Sided, Series: CoroTurn® 107, VBGT-UM Insert, V-35 deg Diamond, 1.3 mm Maximum Depth of Cut, 3/8 in Inscribed Circle, 0.1874 in Thickness, 0.6537 in Length, UM Chipbreaker, 0.0156 in Corner Radius, 0.1732 in Hole Dia, Manufacturer's Grade: 1025, ANSI Code: VBGT 331-UM 1025, ISO Code: VBGT 16 04 04-UM 1025, 35 deg Included Angle, 5 deg Relief Angle, Neutral Hand, Carbide, PVD Coated, Material Grade: S
- Features
| 5 deg major clearance |
| F cutting edge condition |
| 2 cutting edges |
| 40 - 60 deg countersunk hole and non-flat surface clamping interface |
| 16.2 mm L effective cutting edge |
| G tolerance class |
| 0.08 - 0.21 mm/r cutting feed |
| 30 life cycle state |
| Sharp cutting edges and excellent chip control ensure a soft cutting action and low cutting forces, providing an excellent surface finish to the component |
| 7 deg clearance angle |
| Screw clamping ensures stability and unobstructed chip flow |
| Holders and insert geometries with conventional and CoroTurn HP design |
| For longitudinal turning and profiling |
| Positive rake |
| Screw clamp mount |