Sandvik Coromant 5755003 CoroTurn® 107 1-Sided Turning Insert, TPMT 2(1.5)2-UM 1025, T-Triangle, TPMT-UM Insert, 1025, Carbide
TPMT Turning Inserts
616549
MFG #: 5755003
Sandvik Coromant
10.84000
/ ea
- ANSI Code: TPMT 2(1.5)2-UM 1025
- Catalog Number: 5755003
- Corner Radius: 0.0312 in
- Country of Origin: US
- Finish: PVD Coated
- Gross Weight Per Pack: 1 lb
- Hand of Insert: Neutral
- Hole Diameter: 0.1102 in
- Included Angle: 60 deg
- ISO Code: TPMT 11 02 08-UM 1025
- Length: 0.4329 in
- Relief Angle: 11 deg
- Series: CoroTurn® 107
- Thickness: 0.0937 in
- Type: 1-Sided
- UPC 11: 69826202675
- UPC 12: 69826202675
- Width: Neutral
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: UM
- Cutting Direction: Neutral
- For Use On: Stainless Steel, Steel, Cast Iron and Heat-Resistant Super Alloys
- Inscribed Circle: 1/4 in
- Insert Size: T - Triangle
- Insert Style: TPMT-UM
- Manufacturer's Grade: 1025
- Material: Carbide
- Material Grade: M/S
- Maximum Depth of Cut: 0.67 mm
- Rake: Positive
- Seat Size: 11
- Shape: T-Triangle
Sandvik Coromant Turning Insert, 1-Sided, Series: CoroTurn® 107, TPMT-UM Insert, T-Triangle, 0.67 mm Maximum Depth of Cut, 1/4 in Inscribed Circle, 0.0937 in Thickness, 0.4329 in Length, UM Chipbreaker, 0.0312 in Corner Radius, 0.1102 in Hole Dia, Manufacturer's Grade: 1025, ANSI Code: TPMT 2(1.5)2-UM 1025, ISO Code: TPMT 11 02 08-UM 1025, 60 deg Included Angle, 11 deg Relief Angle, Neutral Hand, Carbide, PVD Coated, Material Grade: M/S
- Features
| 11 deg major clearance |
| E cutting edge condition |
| 3 cutting edges |
| 40 - 60 deg countersunk hole and non-flat surface clamping interface |
| 10.19 mm L effective cutting edge |
| M tolerance class |
| 0.09 - 0.26 mm/r cutting feed |
| 30 life cycle state |
| Sharp cutting edges and excellent chip control ensure a soft cutting action and low cutting forces, providing an excellent surface finish to the component |
| 7 deg clearance angle |
| Screw clamping ensures stability and unobstructed chip flow |
| Holders and insert geometries with conventional and CoroTurn HP design |
| For longitudinal turning and profiling |
| Positive rake |
| Screw clamp mount |