Sandvik Coromant 5751726 CoroTurn® 107 1-Sided Turning Insert, TCGX 2(1.5)1L-WK 1025, T-Triangle, TCGX-WK Insert, 1025
TCGX Turning Inserts
1234232
MFG #: 5751726
Sandvik Coromant
17.20000
/ ea
- ANSI Code: TCGX 2(1.5)1L-WK 1025
- Catalog Number: 5751726
- Corner Radius: 0.0156 in
- Country of Origin: IN
- Finish: PVD Coated
- Gross Weight Per Pack: 1 lb
- Hand of Insert: Left
- Hole Diameter: 0.1102 in
- Included Angle: 60 deg
- ISO Code: TCGX 11 02 04L-WK 1025
- Length: 0.4228 in
- Relief Angle: Carbide
- Series: CoroTurn® 107
- Thickness: 0.0937 in
- Type: 1-Sided
- UPC 11: 69826211792
- Width: 0.396 mm
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: WK
- Cutting Direction: Left Hand
- For Use On: Cast Iron, Stainless Steel, Non-Ferrous Metals, Steel, Heat-Resistant Super Alloys and Titanium
- Inscribed Circle: 1/4 in
- Insert Size: 1025
- Insert Style: TCGX-WK
- Manufacturer's Grade: 1025
- Material: Carbide
- Material Grade: M/S
- Maximum Depth of Cut: 0.5 mm
- Rake: Positive
- Seat Size: 11
- Shape: T-Triangle
Sandvik Coromant Turning Insert, 1-Sided, Series: CoroTurn® 107, TCGX-WK Insert, T-Triangle, 0.5 mm Maximum Depth of Cut, 1/4 in Inscribed Circle, 0.0937 in Thickness, 0.4228 in Length, WK Chipbreaker, 0.0156 in Corner Radius, 0.1102 in Hole Dia, Manufacturer's Grade: 1025, ANSI Code: TCGX 2(1.5)1L-WK 1025, ISO Code: TCGX 11 02 04L-WK 1025, 60 deg Included Angle, Left Hand, Carbide, PVD Coated, Material Grade: M/S
- Features
7 deg major clearance |
F cutting edge condition |
3 cutting edges |
40 - 60 deg countersunk hole and non-flat surface clamping interface |
91 deg cutting edge |
10.34 mm L effective cutting edge |
G tolerance class |
Wiper edge technology |
0.05 - 0.3 mm/r cutting feed |
30 life cycle state |
Sharp cutting edges and excellent chip control ensure a soft cutting action and low cutting forces, providing an excellent surface finish to the component |
7 deg clearance angle |
Screw clamping ensures stability and unobstructed chip flow |
Holders and insert geometries with conventional and CoroTurn HP design |
For longitudinal turning and profiling |