Sandvik Coromant 6612424 CoroTurn® 107 Basic Shape Positive Turning Insert, SCMT 3(2.5)1-PM 4315, S-Square, SCMT Insert, 4315
SCMT Turning Inserts
1073735
MFG #: 6612424
Sandvik Coromant
14.05000
/ ea
- Alternate Catalog Number: SCMT 3(2.5)1-PM 4315
- ANSI Code: SCMT 3(2.5)1-PM 4315
- Catalog Number: 6612424
- Corner Radius: 0.0156 in
- Country of Origin: SE
- Finish: CVD-TiCN+Al2O3+TiN Coated
- Gross Weight Per Pack: 0.1000 lb
- Hole Diameter: 0.1732 in
- Included Angle: 90 °
- ISO Code: SCMT 09 T3 04-PM 4315
- Item Group: 122
- Length: 3/8 in
- Relief Angle: 7 °
- Series: CoroTurn® 107
- Thickness: 0.156 in
- Width: 3/8 in
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: PM
- Cutting Direction: Neutral
- For Use On: Cast Iron and Steel
- Inscribed Circle: 3/8 in
- Insert Size: 3(2.5)1
- Insert Style: SCMT
- Manufacturer's Grade: 4315
- Material: Carbide
- Material Grade: K, P
- Maximum Depth of Cut: 3 mm
- Rake: Positive
- Seat Size: 09
- Shape: Square
Sandvik Coromant Turning Insert, Basic Shape Positive, Series: CoroTurn® 107, SCMT Insert, S-Square, 3 mm Maximum Depth of Cut, 3/8 in Inscribed Circle, 0.1562 in Thickness, 3/8 in Length, PM Chipbreaker, 0.0156 in Corner Radius, 0.1732 in Hole Dia, Manufacturer's Grade: 4315, ANSI Code: SCMT 3(2.5)1-PM 4315, ISO Code: SCMT 09 T3 04-PM 4315, 90 deg Included Angle, 7 deg Relief Angle, Neutral Hand, Carbide, MTCVD Coated, Material Grade: K/P
- Features
| T8330 grade sub-micron substrate with a relatively high cobalt content |
| Nano-layered PVD coating with gradient transitions |
| Lower internal coating tension with higher hardness |
| Lower notch wear on the main cutting edge |
| Medium cutting speeds |
| Good operative reliability |
| Impaired machining conditions |
| Rounded edges |
| 0.08 - 0.23 mm/r cutting feed |
| 20 life cycle state |