Sandvik Coromant 5748678 CoroTurn® 107 1-Sided Turning Insert, SCMT 3(2.5)1-MF 1025, S-Square, SCMT-MF Insert, 1025
SCMT Turning Inserts
1250339
MFG #: 5748678
Sandvik Coromant
10.84000
/ ea
- ANSI Code: SCMT 3(2.5)1-MF 1025
- Catalog Number: 5748678
- Corner Radius: 0.0156 in
- Country of Origin: SE
- Finish: PVD Coated
- Gross Weight Per Pack: 0.0200 lb
- Hand of Insert: Neutral
- Hole Diameter: 0.1732 in
- Included Angle: 90 deg
- ISO Code: SCMT 09 T3 04-MF 1025
- Length: 3/8 in
- Relief Angle: 9.525 mm
- Series: CoroTurn® 107
- Thickness: 0.1562 in
- Type: 1-Sided
- UPC 11: 69826212181
- Width: 0.396 mm
- Width UOM: IN
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: MF
- Cutting Direction: Neutral
- For Use On: Stainless Steel, Steel, Heat-Resistant Super Alloys and Titanium
- Inscribed Circle: 3/8 in
- Insert Size: MF
- Insert Style: SCMT-MF
- Manufacturer's Grade: 1025
- Material: Carbide
- Material Grade: P
- Maximum Depth of Cut: 0.35 mm
- Rake: Positive
- Seat Size: 09
- Shape: S-Square
Sandvik Coromant Turning Insert, 1-Sided, Series: CoroTurn® 107, SCMT-MF Insert, S-Square, 0.35 mm Maximum Depth of Cut, 3/8 in Inscribed Circle, 0.1562 in Thickness, 3/8 in Length, MF Chipbreaker, 0.0156 in Corner Radius, 0.1732 in Hole Dia, Manufacturer's Grade: 1025, ANSI Code: SCMT 3(2.5)1-MF 1025, ISO Code: SCMT 09 T3 04-MF 1025, 90 deg Included Angle, Neutral Hand, Carbide, PVD Coated, Material Grade: P
- Features
| 7 deg major clearance |
| E cutting edge condition |
| 4 cutting edges |
| 40 - 60 deg countersunk hole and non-flat surface clamping interface |
| 9.125 mm L effective cutting edge |
| M tolerance class |
| 0.06 - 0.23 mm/r cutting feed |
| 30 life cycle state |
| Sharp cutting edges and excellent chip control ensure a soft cutting action and low cutting forces, providing an excellent surface finish to the component |
| 7 deg clearance angle |
| Screw clamping ensures stability and unobstructed chip flow |
| Holders and insert geometries with conventional and CoroTurn HP design |
| For longitudinal turning and profiling |