Sandvik Coromant 6532308 T-Max® P Negative Basic Shape Turning Insert, RNMG 64 4325, R-Round, RNMG Insert, 4325, Carbide
RNMG Turning Inserts
801238
MFG #: 6532308
Sandvik Coromant
30.62000
/ ea
- Alternate Catalog Number: RNMG 64 4325
- ANSI Code: RNMG 64 4325
- Catalog Number: 6532308
- Corner Radius: 3/8 in
- Country of Origin: SE
- Finish: CVD-TiCN+Al2O3+TiN Coated
- Gross Weight Per Pack: 0.5200 lb
- Hole Diameter: 0.312 in
- ISO Code: RNMG 19 06 00 4325
- Item Group: 112
- Relief Angle: 0 °
- Series: T-Max® P
- Thickness: 1/4 in
- Type: 2-Sided Basic Shape
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: NMG
- Cutting Direction: Neutral
- For Use On: Cast Iron and Steel
- Inscribed Circle: 3/4 in
- Insert Size: 64
- Insert Style: RNMG
- Manufacturer's Grade: 4325
- Material: Carbide
- Material Grade: K, P
- Maximum Depth of Cut: 0.299 in
- Rake: Negative
- Seat Size: 19
- Shape: Round
Sandvik Coromant Turning Insert, Negative Basic Shape, Series: T-Max® P, RNMG Insert, R-Round, 7.6 mm Maximum Depth of Cut, 3/4 in Inscribed Circle, 1/4 in Thickness, NMG Chipbreaker, 3/8 in Corner Radius, 0.312 in Hole Dia, Manufacturer's Grade: 4325, ANSI Code: RNMG 64 4325, ISO Code: RNMG 19 06 00 4325, 0 deg Relief Angle, Neutral Hand, Carbide, MTCVD Coated, Material Grade: K/P
- Features
| T9325 grade functionally gradient substrate |
| Relatively low content of cobalt binder phase |
| Thick MT-CVD coating |
| Highly versatile material with very good operational reliability |
| Special surface finish for coating |
| Medium and higher cutting speed |
| Continuous and interrupted cut |
| Unfavorable cutting conditions, continuous and/or interrupted cuts |
| Cutting geometry suitable for grooving and axial turning |
| For fine turning and finishing |