Sandvik Coromant 6532146 CoroTurn® 107 Basic Shape Positive Turning Insert, RCMT 22 4325, R-Round, RCMT Insert, 4325
RCMT Turning Inserts
863101
MFG #: 6532146
Sandvik Coromant
10.60000
/ ea
- Alternate Catalog Number: RCMT 22 4325
- ANSI Code: RCMT 22 4325
- Catalog Number: 6532146
- Corner Radius: 1/8 in
- Country of Origin: US
- Finish: CVD-TiCN+Al2O3+TiN Coated
- Gross Weight Per Pack: 4.6500 lb
- Hole Diameter: 0.1102 in
- ISO Code: RCMT 06 03 00 4325
- Item Group: 122
- Relief Angle: 7 °
- Series: CoroTurn® 107
- Thickness: 1/8 in
- Type: 1-Sided Basic Shape
- Stock Status: NORMALLY STOCKED
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Cutting Direction: Neutral
- For Use On: Cast Iron and Steel
- Inscribed Circle: 1/4 in
- Insert Size: 22
- Insert Style: RCMT
- Manufacturer's Grade: 4325
- Material: Carbide
- Material Grade: K, P
- Maximum Depth of Cut: 0.095 in
- Rake: Positive
- Seat Size: 06
- Shape: Round
Sandvik Coromant Turning Insert, Basic Shape Positive, Series: CoroTurn® 107, RCMT Insert, R-Round, 2.4 mm Maximum Depth of Cut, 1/4 in Inscribed Circle, 1/8 in Thickness, RCMT Chipbreaker, 1/8 in Corner Radius, 0.1102 in Hole Dia, Manufacturer's Grade: 4325, ANSI Code: RCMT 22 4325, ISO Code: RCMT 06 03 00 4325, 7 deg Relief Angle, Neutral Hand, Carbide, MTCVD Coated, Material Grade: K/P
- Features
| T9325 grade functionally gradient substrate |
| Relatively low content of cobalt binder phase |
| Thick MT-CVD coating |
| Highly versatile material with very good operational reliability |
| Special surface finish for coating |
| Medium and higher cutting speed |
| Continuous and interrupted cut |
| Unfavorable cutting conditions, continuous and/or interrupted cuts |
| 0.06 - 0.62 mm/r cutting feed |
| 20 life cycle state |