Sandvik Coromant 5731794 T-Max® P Negative Basic Shape Turning Insert, DNGP 432 1005, D-55 deg Diamond, DNGP Insert, 1005
DNGP Turning Inserts
1228258
MFG #: 5731794
Sandvik Coromant
20.19000
/ ea
- ANSI Code: DNGP 432 1005
- Catalog Number: 5731794
- Corner Radius: 0.0312 in
- Finish: PVD Coated
- Gross Weight Per Pack: 0.0300 lb
- Hand of Insert: Neutral
- Hole Diameter: 0.2029 in
- Included Angle: 55 deg
- ISO Code: DNGP 15 04 08 1005
- Length: 0.6103 in
- Relief Angle: 0 deg LB
- Series: T-Max® P
- Thickness: 0.1874 in
- Type: Negative Basic Shape
- UPC 11: 69826213216
- Width: NGP
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: NGP
- Cutting Direction: Neutral
- For Use On: Stainless Steel, Heat Resistant Super Alloys and Titanium
- Inscribed Circle: 1/2 in
- Insert Size: D - 55 deg Diamond
- Insert Style: DNGP
- Manufacturer's Grade: 1005
- Material: Carbide
- Material Grade: S
- Maximum Depth of Cut: 0.5 mm
- Rake: Negative
- Seat Size: 15
- Shape: D-55 deg Diamond
Sandvik Coromant Turning Insert, Negative Basic Shape, Series: T-Max® P, DNGP Insert, D-55 deg Diamond, 0.5 mm Maximum Depth of Cut, 1/2 in Inscribed Circle, 0.1874 in Thickness, 0.6103 in Length, NGP Chipbreaker, 0.0312 in Corner Radius, 0.2029 in Hole Dia, Manufacturer's Grade: 1005, ANSI Code: DNGP 432 1005, ISO Code: DNGP 15 04 08 1005, 55 deg Included Angle, 0 deg Relief Angle, Neutral Hand, Carbide, PVD Coated, Material Grade: S
- Features
| Straight hole and non-flat surface clamping interface |
| 2-side cutting |
| +/-0.13 mm THK and +/-0.025 mm inscribed circle tolerance |
| Sharp cutting edge |
| Solid carbide is extremely heat-resistant and used for high speed applications on cast iron, non-ferrous materials, plastics and other tough-to-machine materials |
| For external turning operations and internal machining |
| 0.1 - 0.25 mm/r cutting feed |
| 40 life cycle state |