Sandvik Coromant 5730655 CoroTurn® 107 1-Sided Turning Insert, DCMX 3(2.5)1-WF 1025, D-55 deg Diamond, DCMX-WF Insert
DCMX Turning Inserts
289928
MFG #: 5730655
Sandvik Coromant
14.38000
/ ea
- ANSI Code: DCMX 3(2.5)1-WF 1025
- Catalog Number: 5730655
- Corner Radius: 0.0156 in
- Country of Origin: SE
- Finish: PVD Coated
- Gross Weight Per Pack: 0.0100 lb
- Hand of Insert: Neutral
- Hole Diameter: 0.1732 in
- Included Angle: 55 deg
- ISO Code: DCMX 11 T3 04-WF 1025
- Length: 0.4577 in
- Relief Angle: 7 deg
- Series: CoroTurn® 107
- Thickness: 0.1562 in
- Type: 1-Sided
- UPC 11: 69826213510
- UPC 12: 69826213510
- Width: M, S
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: WF
- Cutting Direction: Neutral
- For Use On: Stainless Steel, Heat Resistant Super Alloys and Titanium
- Inscribed Circle: 3/8 in
- Insert Size: D - 55 deg Diamond
- Insert Style: DCMX-WF
- Manufacturer's Grade: 1025
- Material: Carbide
- Material Grade: M/S
- Maximum Depth of Cut: 1 mm
- Rake: Positive
- Seat Size: 11
- Shape: D-55 deg Diamond
Sandvik Coromant Turning Insert, 1-Sided, Series: CoroTurn® 107, DCMX-WF Insert, D-55 deg Diamond, 1 mm Maximum Depth of Cut, 3/8 in Inscribed Circle, 0.1562 in Thickness, 0.4577 in Length, WF Chipbreaker, 0.0156 in Corner Radius, 0.1732 in Hole Dia, Manufacturer's Grade: 1025, ANSI Code: DCMX 3(2.5)1-WF 1025, ISO Code: DCMX 11 T3 04-WF 1025, 55 deg Included Angle, 7 deg Relief Angle, Neutral Hand, Carbide, PVD Coated, Material Grade: M/S
- Features
| 7 deg major clearance |
| E cutting edge condition |
| 2 cutting edges |
| 40 - 60 deg countersunk hole and non-flat surface clamping interface |
| 93 deg cutting edge |
| 11.22 mm L effective cutting edge |
| M tolerance class |
| Wiper edge technology |
| 0.07 - 0.3 mm/r cutting feed |
| 30 life cycle state |
| Sharp cutting edges and excellent chip control ensure a soft cutting action and low cutting forces, providing an excellent surface finish to the component |
| 7 deg clearance angle |
| Screw clamping ensures stability and unobstructed chip flow |
| Holders and insert geometries with conventional and CoroTurn HP design |
| For longitudinal turning and profiling |
| Positive rake |
| Screw clamp mount |