Sandvik Coromant 5730652 CoroTurn® 107 1-Sided Turning Insert, DCMX 2(1.5)2-WF 4215, D-55 deg Diamond, DCMX-WF Insert, 4215
DCMX Turning Inserts
1228714
MFG #: 5730652
Sandvik Coromant
13.30000
/ ea
- ANSI Code: DCMX 2(1.5)2-WF 4215
- Catalog Number: 5730652
- Corner Radius: 0.0312 in
- Country of Origin: SE
- Finish: MTCVD Coated
- Gross Weight Per Pack: 1 lb
- Hand of Insert: Neutral
- Hole Diameter: 0.1102 in
- Included Angle: 55 deg
- ISO Code: DCMX 07 02 08-WF 4215
- Length: 0.3051 in
- Relief Angle: 7 deg LB
- Series: CoroTurn® 107
- Thickness: 0.0937 in
- Type: 1-Sided
- UPC 11: 69826239276
- Width: 7.751 mm
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: WF
- Cutting Direction: Neutral
- For Use On: Steel
- Inscribed Circle: 1/4 in
- Insert Size: 2.381 mm
- Insert Style: DCMX-WF
- Manufacturer's Grade: 4215
- Material: Carbide
- Material Grade: P
- Maximum Depth of Cut: 0.7 mm
- Rake: Positive
- Seat Size: 07
- Shape: D-55 deg Diamond
Sandvik Coromant Turning Insert, 1-Sided, Series: CoroTurn® 107, DCMX-WF Insert, D-55 deg Diamond, 0.7 mm Maximum Depth of Cut, 1/4 in Inscribed Circle, 0.0937 in Thickness, 0.3051 in Length, WF Chipbreaker, 0.0312 in Corner Radius, 0.1102 in Hole Dia, Manufacturer's Grade: 4215, ANSI Code: DCMX 2(1.5)2-WF 4215, ISO Code: DCMX 07 02 08-WF 4215, 55 deg Included Angle, 7 deg Relief Angle, Neutral Hand, Carbide, MTCVD Coated, Material Grade: P
- Features
| 7 deg major clearance |
| E cutting edge condition |
| 2 cutting edges |
| 40 - 60 deg countersunk hole and non-flat surface clamping interface |
| 93 deg cutting edge |
| 6.951 mm L effective cutting edge |
| M tolerance class |
| Wiper edge technology |
| 0.09 - 0.35 mm/r cutting feed |
| 30 life cycle state |
| Sharp cutting edges and excellent chip control ensure a soft cutting action and low cutting forces, providing an excellent surface finish to the component |
| 7 deg clearance angle |
| Screw clamping ensures stability and unobstructed chip flow |
| Holders and insert geometries with conventional and CoroTurn HP design |
| For longitudinal turning and profiling |
| Positive rake |
| Screw clamp mount |