Sandvik Coromant 5730522 CoroTurn® 107 Basic Shape Positive Turning Insert, DCGX 2(1.5)1-AL 1005, D-55 deg Diamond, DCGX Insert
DCGX Turning Inserts
1228768
MFG #: 5730522
Sandvik Coromant
15.46000
/ ea
- ANSI Code: DCGX 2(1.5)1-AL 1005
- Catalog Number: 5730522
- Corner Radius: 0.0156 in
- Country of Origin: JP
- Finish: PVD Coated
- Gross Weight Per Pack: 1 lb
- Hand of Insert: Neutral
- Hole Diameter: 0.1102 in
- Included Angle: 55 deg
- ISO Code: DCGX 07 02 04-AL 1005
- Length: 0.3051 in
- Relief Angle: 7 deg LB
- Series: CoroTurn® 107
- Thickness: 0.0937 in
- Type: Basic Shape Positive
- UPC 11: 69826234769
- Width: AL
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: AL
- Inscribed Circle: 1/4 in
- Insert Size: D - 55 deg Diamond
- Insert Style: DCGX
- Manufacturer's Grade: 1005
- Material: Carbide
- Material Grade: N
- Maximum Depth of Cut: 4 mm
- Shape: D-55 deg Diamond
Sandvik Coromant Turning Insert, Basic Shape Positive, Series: CoroTurn® 107, DCGX Insert, D-55 deg Diamond, 4 mm Maximum Depth of Cut, 1/4 in Inscribed Circle, 0.0937 in Thickness, 0.3051 in Length, AL Chipbreaker, 0.0156 in Corner Radius, 0.1102 in Hole Dia, Manufacturer's Grade: 1005, ANSI Code: DCGX 2(1.5)1-AL 1005, ISO Code: DCGX 07 02 04-AL 1005, 55 deg Included Angle, 7 deg Relief Angle, Neutral Hand, Carbide, PVD Coated, Material Grade: N
- Features
| 40 - 60 deg countersunk hole and non-flat surface clamping interface |
| 1-side cutting |
| +/-0.13 mm THK and +/-0.025 mm inscribed circle tolerance |
| Sharp cutting edge |
| Solid carbide is extremely heat-resistant and used for high speed applications on cast iron, non-ferrous materials, plastics and other tough-to-machine materials |
| For external machining of small, long, slender components and internal machining |
| The positive insert shape combines low cutting forces with good edge strength |
| The screw clamping ensures stability and unobstructed chip flow |
| 0.1 - 0.3 mm/r cutting feed |
| 30 life cycle state |