Sandvik Coromant 5767853 CoroTurn® 107 1-Sided Turning Insert, DCGW3(2.5)2S0630F 7025, D-55 deg Diamond, DCGW..S..F Insert, 7025
DCGW Turning Inserts
1228778
MFG #: 5767853
Sandvik Coromant
91.60000
/ ea
- Alternate Catalog Number: DCGW3(2.5)2S0630F 7025
- ANSI Code: DCGW3(2.5)2S0630F 7025
- Catalog Number: 5767853
- Corner Radius: 0.0312 in
- Country of Origin: PL
- Finish: Uncoated
- Gross Weight Per Pack: 0.0100 lb
- Hand of Insert: Neutral
- Hole Diameter: 0.1732 in
- Included Angle: 55 deg
- ISO Code: DCGW11T308S01530F 7025
- Item Group: 620
- Length: 0.4577 in
- Relief Angle: 7 deg
- Series: CoroTurn® 107
- Thickness: 0.1562 in
- Type: 1-Sided
- UPC 11: 69826256664
- Width: DCGW11T308S01530F 7025
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: 3.968 mm
- Inscribed Circle: 3/8 in
- Insert Size: 11.627 mm
- Insert Style: DCGW..S..F
- Manufacturer's Grade: 7025
- Material: Carbide
- Material Grade: H
- Maximum Depth of Cut: 0.2 mm
- Shape: D-55 deg Diamond
Sandvik Coromant Turning Insert, 1-Sided, Series: CoroTurn® 107, DCGW..S..F Insert, D-55 deg Diamond, 0.2 mm Maximum Depth of Cut, 3/8 in Inscribed Circle, 0.1562 in Thickness, 0.4577 in Length, 0.0312 in Corner Radius, 0.1732 in Hole Dia, Manufacturer's Grade: 7025, ANSI Code: DCGW3(2.5)2S0630F 7025, ISO Code: DCGW11T308S01530F 7025, 55 deg Included Angle, 7 deg Relief Angle, Neutral Hand, Carbide, Uncoated, Material Grade: H
- Features
| 7 deg major clearance |
| 0.15 mm W face land |
| S cutting edge condition |
| 2 cutting edges |
| 40 - 60 deg countersunk hole and flat surface clamping interface |
| 30 deg face land |
| 3.1 mm L effective cutting edge |
| G tolerance class |
| 0.05 - 0.3 mm/r cutting feed |
| 20 life cycle state |
| Sharp cutting edges and excellent chip control ensure a soft cutting action and low cutting forces, providing an excellent surface finish to the component |
| 7 deg clearance angle |
| Screw clamping ensures stability and unobstructed chip flow |
| Holders and insert geometries with conventional and CoroTurn HP design |
| For longitudinal turning and profiling |
| Positive rake |