Sandvik Coromant 5723037 CoroTurn® 107 1-Sided Turning Insert, CCGT 3(2.5)1-UM 1005, C-80 deg Diamond, CCGT-UM Insert
CCGT Turning Inserts
1229549
MFG #: 5723037
Sandvik Coromant
20.63000
/ ea
- ANSI Code: CCGT 3(2.5)1-UM 1005
- Catalog Number: 5723037
- Corner Radius: 0.0156 in
- Country of Origin: IN
- Finish: PVD Coated
- Gross Weight Per Pack: 0.0100 lb
- Hand of Insert: Neutral
- Hole Diameter: 0.1732 in
- Included Angle: 80 deg
- ISO Code: CCGT 09 T3 04-UM 1005
- Length: 0.3807 in
- Relief Angle: 7 deg
- Series: CoroTurn® 107
- Thickness: 0.1562 in
- Type: 1-Sided
- UPC 11: 69826217191
- Width: 1.3 mm
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: UM
- Cutting Direction: Neutral
- For Use On: Stainless Steel, Non-Ferrous Materials and Heat Resistant Super Alloys and Titanium
- Inscribed Circle: 3/8 in
- Insert Size: CCGT 09 T3 04-UM 1005
- Insert Style: CCGT-UM
- Manufacturer's Grade: 1005
- Material: Carbide
- Material Grade: S
- Maximum Depth of Cut: 1.3 mm
- Rake: Positive
- Seat Size: 09
- Shape: C-80 deg Diamond
Sandvik Coromant Turning Insert, 1-Sided, Series: CoroTurn® 107, CCGT-UM Insert, C-80 deg Diamond, 1.3 mm Maximum Depth of Cut, 3/8 in Inscribed Circle, 0.1562 in Thickness, 0.3807 in Length, UM Chipbreaker, 0.0156 in Corner Radius, 0.1732 in Hole Dia, Manufacturer's Grade: 1005, ANSI Code: CCGT 3(2.5)1-UM 1005, ISO Code: CCGT 09 T3 04-UM 1005, 80 deg Included Angle, 7 deg Relief Angle, Neutral Hand, Carbide, PVD Coated, Material Grade: S
- Features
| 7 deg major clearance |
| F cutting edge condition |
| 2 cutting edges |
| 40 - 60 deg countersunk hole and non-flat surface clamping interface |
| 9.271 mm L effective cutting edge |
| G tolerance class |
| 0.08 - 0.18 mm/r cutting feed |
| 30 life cycle state |
| Sharp cutting edges and excellent chip control ensure a soft cutting action and low cutting forces, providing an excellent surface finish to the component |
| 7 deg clearance angle |
| Screw clamping ensures stability and unobstructed chip flow |
| Holders and insert geometries with conventional and CoroTurn HP design |
| For longitudinal turning and profiling |
| Positive rake |
| Screw clamp mount |