Sandvik Coromant 5744135 CoroMill® 290 Milling Insert, R290.90-12T308PPM-WLH13A, S-Square, R/L290.90..M-WL Insert, Carbide, H13A, R290.90-12T308PPM-WLH13A
R290/L290 Milling Inserts
1250928
MFG #: 5744135
Sandvik Coromant
11.31000
/ ea
- ANSI Code: R290.90-12T308PPM-WLH13A
- Catalog Number: 5744135
- Corner Radius: 0.0314 in
- Country of Origin: JP
- Finish: Uncoated
- Gross Weight Per Pack: 0.0200 lb
- Hand of Insert: Right
- Hole Diameter: 0.1614 in
- ISO Code: R290.90-12T308PPM-WLH13A
- Lead Angle: 90 deg
- Length: 0.5232 in
- Relief Angle: 3.96875 mm
- Series: CoroMill® 290
- Thickness: 0.1562 in
- Type: 0.8 mm
- UPC 11: 69826203839
- Width: S - Square
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: WL
- Inscribed Circle: 0.5232 in
- Insert Size: 3.96875 mm
- Insert Style: R/L290.90..M-WL
- Manufacturer's Grade: H13A
- Material: Carbide
- Material Grade: K/N/S
- Rake: Positive
- Shape: S-Square
Sandvik Coromant Milling Insert, Series: CoroMill® 290, R/L290.90..M-WL Insert, S-Square, 0.5232 in Inscribed Circle, 0.1562 in Thickness, 0.5232 in Length, WL Chipbreaker, 0.0314 in Corner Radius, Positive Rake, 90 deg Lead Angle, 0.1614 in Hole Dia, Manufacturer's Grade: H13A, ANSI Code: R290.90-12T308PPM-WLH13A, ISO Code: R290.90-12T308PPM-WLH13A, Right Hand, Carbide, Uncoated, Material Grade: K/N/S
- Features
| 40 - 60 deg countersunk hole and non-flat surface clamping interface |
| 18 deg clearance |
| 10.7 mm D cutting |
| 1.53 mm L wiper edge |
| 90 deg included |
| 90 deg major cutting edge |
| 10.7 mm L effective cutting edge |
| 1-side cutting |
| 20 life cycle state |
| 4 corner |
| E cutting edge condition |
| 4 cutting edge |
| Screw clamp mounting |
| 0.08 - 0.15 mm/r cutting feed |