Sandvik Coromant 5732758 CoroCut® 3, L123U3-0200-1000-CS 1125, L123U3-CS Insert, Carbide, 1125, L123U3-0200-1000-CS 1125
L123 Cut-off & Parting Inserts
811806
MFG #: 5732758
Sandvik Coromant
40.93000
/ ea
- Alternate Catalog Number: L123U3-0200-1000-CS 1125
- ANSI Code: L123U3-0200-1000-CS 1125
- Catalog Number: 5732758
- Country of Origin: SE
- Finish: PVD-TiAlN Coated
- Gross Weight Per Pack: 0.2000 lb
- Hand of Insert: Left
- ISO Code: L123U3-0200-1000-CS 1125
- Item Group: 320
- Length: 0.4211 in
- Material Grade: K, M, N, P, S
- Series: CoroCut® 3
- Thickness: 0.222 in
- UPC 11: 69826246876
- UPC 12: 69826246876
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: CS
- Corner Radius: 0.002 in
- Cutting Width: 0.0000 in
- Insert Size: U
- Insert Style: L123x3
- Lead Angle: 10 °
- Manufacturer's Grade: 1125
- Material: Carbide
- Relief Angle: 7 °
Sandvik Coromant Parting Insert, Series: CoroCut® 3, L123U3-CS Insert, 0.222 in Thickness, 0.0078 in Width, 0.421 in Length, CS Chipbreaker, Manufacturer's Grade: 1125, ANSI Code: L123U3-0200-1000-CS 1125, ISO Code: L123U3-0200-1000-CS 1125, Left Hand, Carbide, PVD Coated, Material Grade: M/N/P/S
- Features
| 3-edge inserts with very close insert indexing tolerance |
| Cost efficient due to 3 cutting edges |
| 0 deg body machine side |
| Finishing operation |
| 40 - 60 deg countersunk hole and flat surface |
| -0.1 mm W cutting lower tolerance |
| 0 mm W cutting upper tolerance |
| 10 deg major left hand cutting edge |
| 0 mm corner radius lower tolerance |
| 0.05 mm corner radius upper tolerance |
| E cutting edge condition |
| 10 deg lead |
| 3 edges |
| Screw clamp mounting |
| Positive rake |
| 0.02 - 0.12 mm/r cutting feed |
| 3 insert mounting style code |
| U insert seat size code |