Milwaukee® 49-57-2000 Steel Hawg®, 2 in Dia, 2 in Carbide Bit
Annular Cutters
720307
MFG #: 49-57-2000
Milwaukee®
361.90000
/ ea
- Alternate Catalog Number: 49572000
- Applicable Materials: Cast Iron, Mild Steel, Non-Ferrous Soft Metal, Soft/Medium Steel and Stainless Steel
- ARRA Compliant: C
- Buy American Compliant: C
- Catalog Number: 49-57-2000
- Country of Origin: JP
- Currency: USD
- Cutting Edge Material: Carbide
- EU RoHS Indicator: C
- Gross Volume Per Pack: 0.60
- Gross Weight Per Pack: 0.5800 lb
- Gross Weight per Pack Metric: 0.27
- Gross Weight UOM Metric: kg
- Harmonization Tariff Schedule Code: 8207907585
- Height: 2.30 in
- Height [Metric]: 5.8420 cm
- Length: 3.65 in
- Length [Metric]: 9.2710 cm
- Series: Steel Hawg®
- Shank Size: 3/4 in
- Standards: ARRA CompliantBuy American Act CompliantUL ListedOSHA Approved
- Teeth Per Inch: 0
- Type: Threaded Hole
- UNSPSC: 27112826
- UPC 11: 04524220255
- UPC 12: 045242202553
- Warranty Description: None
- Width: 2.55 in
- Width [Metric]: 6.4770 cm
- Stock Status: NONSTOCK
- Brand: Milwaukee®
- Manufacturer: Milwaukee Tool
- Cutter Diameter: 2 in
- Cutting Depth: 2 in
- Finish: Uncoated
- Material: Carbide
- Shank Type: #3 Morse Taper
Drill holes up to 3X faster than twist drill bits with the Milwaukee® 2 in Threaded Steel Hawg® Cutter. This long-lasting cutter features carbide teeth and an alternating cutting pattern to cut up to a 2 in hole depth in steel, stainless steel, cast iron or aluminum. The spring-loaded, self-ejecting pin lets you make smoother, more accurate cuts and eject the plug faster. The Steel Hawg Cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0030 on Milwaukee® 4262-1 magnetic drill press or arbor 49-57-0010 on Milwaukee® 4292-1 mag press. The 2 in bit diameter has a metric thread size of M18 x 1.5 in shank. Use the Threaded Steel Hawg with a No. 3 Morse Taper Arbor Assembly 49-57-0010.
- Features
Features |
| Faster cutting-alternating tooth form geometry makes fast work of cutting steel |
| Long life - abrasion-resistant carbide teeth increase cutter life and produce a cleaner cut |
| The steel hawg cutter works with most electromagnetic drill presses |
| Features carbide teeth and an alternating cutting pattern to cut up to a 1 in hole depth in steel, stainless steel, cast iron or aluminum |
| The steel hawg cutters' multiple cutting edges uniformly distribute cutting over a wider area than a two flute twist drill tip |
| Accurate cuts-Spring-loaded, self-ejecting pin doubles as a centering pin and permits faster plug removal |
| Alternating inside and outside cutting edges are carefully honed to cut holes rapidly with great precision |
| Hardened carbide-Last longer than regular twist drills |
| For use with NO 3 morse taper arbor assembly 49-57-0012, 49-57-0013 and 49-57-0032 |
| 2 in Cutting depth |
| 3/4 in Shank |
| 7 Teeths |
| Morse taper shank |
| M18x1.5 Thread |