KEO 10115 Double End Plain Standard Combined Drill and Countersink, #1, 60 deg Included, 118 deg Point, T15 HSS, Uncoated
Combined Drill & Countersinks
283770
MFG #: 103-010115
KEO
20.56000
/ ea
- Body Diameter: 1/8 in
- Catalog Number: 103-010115
- Connection Type: Shank
- Country of Origin: US
- Cutting Diameter: 0.0469 in
- Cutting Direction: Right Hand
- Cutting Edge Material: T15 HSS
- Drill Diameter: 3/64 in
- Flute Type: Spiral
- Functional Length: 0.1262 in
- Gross Weight Per Pack: 1 lb
- Line Drawing Dimensions: A=118.0° A1=60.0° DC=0.0469" DCONms=0.1250" L=1.2500" LF=0.1262" LU=0.1262"
- Number of Cutting Edges: 2
- Number of Flutes: 2
- Overall Length: 1-1/4 in
- Point Diameter: #1
- Shank Diameter: 0.1250 in
- Shank Length: 0.6250 in
- Shank Size: 1/8 in
- Shank Type: Round
- Standards: ISO 9002|9001:2008
- Type: Aircraft Double End Plain Standard
- UNSPSC: 23241603
- UPC 11: 67014510115
- UPC 12: 67014510115
- Usable Length: 0.1262 in
- Stock Status: NONSTOCK
- Brand: KEO
- Manufacturer: ARCH Cutting Tools
- Applicable Materials: Steel and Other Ferrous Materials
- Finish: Bright
- Included Angle: 60 °
- Material: T-15
- Point Angle: 118 °
KEO Combined Drill and Countersink, Double End Plain Standard, #1, 3/64 in Point Dia, 1/8 in Body Dia, 1-1/4 in Overall Length, 2 Flutes, Spiral Flute, 1/8 in Shank, Round Shank, 118 deg Point, 60 deg Included Angle, Right Hand Cutting, T15 HSS Cutting Edge, T15 HSS, Uncoated, Applicable Materials: Steel and Other Ferrous Metals
- Features
| KEO plain type combined drill and countersinks are used for producing center holes in components or workpieces which require machining between centers |
| 3/64 in L point |
| Cobalt for tougher materials and great wear resistance |
| Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications |
| Round shanks allow use with a wide variety of toolholding systems |
| When run in a counterclockwise direction, right hand cut spiral fluted tools evacuate chips up and out of the cut to reduce clogging |
| For producing center holes in components or work pieces with the extra length allowing access to difficult-to-reach areas |