or to view stock quantity and your pricing.
Steiner serves territories in Northern Illinois, Northwest Indiana and Southern Wisconsin. Please for assistance if outside our sales territory.
Crosby®
Crosby® 2701663 IPU10 Universal Vertical Lifting Clamp, 1 ton Load, 3/4 in Jaw, 5 in OAW, Welded Alloy Steel
Crosby®
Crosby® 2701663 IPU10 Universal Vertical Lifting Clamp, 1 ton Load, 3/4 in Jaw, 5 in OAW, Welded Alloy Steel
SKU736607
MFGR #2701663
Your Cost: $1,489.32/ea
Crosby® Lifting Clamp, Universal Vertical, Series: IPU10, 1 ton, 3/4 in Jaw Opening, 5 in Overall Width, Welded Alloy Steel
Crosby® Lifting Clamp, Universal Vertical, Series: IPU10, 1 ton, 3/4 in Jaw Opening, 5 in Overall Width, Welded Alloy Steel
Catalog Number 2701663 Gross Weight Per Pack 1 lb Series IPU10 Standards ISO 9001 Type Universal Vertical Stock Status NONSTOCK Brand Crosby® Manufacturer Crosby Group LLC Jaw Opening 3/4 in Load Capacity 1 ton Material Welded Alloy Steel Overall Width 5 in Welded alloy steel body for strength and smaller size Full 180 deg turning range for material transfer, turning or moving Lock open, lock closed ability with latch for pretension on material and then release of material Minimum WLL of 10% of maximum WLL For use with materials with a surface hardness to 279HV10 only 5% minimum WLL is needed
content loaded
content loaded
content loaded
content loaded
- Attributes
- Documents & Resources
- Features
- Substitute Products
| Catalog Number | 2701663 |
| Gross Weight Per Pack | 1 lb |
| Series | IPU10 |
| Standards | ISO 9001 |
| Type | Universal Vertical |
| Stock Status | NONSTOCK |
| Brand | Crosby® |
| Manufacturer | Crosby Group LLC |
| Jaw Opening | 3/4 in |
| Load Capacity | 1 ton |
| Material | Welded Alloy Steel |
| Overall Width | 5 in |
| Welded alloy steel body for strength and smaller size |
| Full 180 deg turning range for material transfer, turning or moving |
| Lock open, lock closed ability with latch for pretension on material and then release of material |
| Minimum WLL of 10% of maximum WLL |
| For use with materials with a surface hardness to 279HV10 only 5% minimum WLL is needed |