nLight® NPODM2PDXWH NPODM Network Wall Pod, <special id="1" />5 mA, 2 Poles, White
Lighting Control Switches
892088
MFG #: NPODM2PDXWH
nLight®
144.64000
/ ea
- Catalog Number: NPODM2PDXWH
- Control: Pushbutton
- Country of Origin: MX
- Dimensions: 2.74 in H x 1.68 in W x 1.63 in D
- Finish: Gloss
- Gross Weight Per Pack: 0.3000 lb
- Mounting Type: Wall
- Series: NPODM
- Standards: UL Listed
- Temperature Rating: 0 to 60 °C
- Type: 2-Channel
- UNSPSC: 39121107
- UPC 11: 74597791195
- UPC 12: 74597791195
- Stock Status: NONSTOCK
- Brand: nLight®
- Manufacturer: Acuity Brands
- Amperage Rating: <5 mA
- Color: White
- Operation Mode: ON/OFF + Raise/Lower
The nPODM Series WallPods are nLight-enabled toggle and/or dimming switches that provide a user with local control of a lighting zone. These single gang decorator style devices have soft-click buttons and have a green LED indicator for each button. WallPods communicate with other nLight devices via a CAT-5 cable that connects to one of its two RJ-45 connectors. A basic low voltage WallPod can work with an nLight power pack or line voltage sensor to provide toggle switch operation. WallPods with the DX dimming option have the added ability to adjust the level of any nLight controlled dimmable lighting.
- Catalog URL - Lithonia_Lighting_NPODM_2P_DX_WH_Brochure.pdf(Catalog URL)
- http://www.lithonia.com(Seller Home Page URL)
- Install Instructions URL - Acuity_Brands_NPODM_2P_DX_IV_Installation.pdf(Install Instructions URL)
- Spec Sheet URL - npodm.pdf(Spec Sheet URL)
- Warranty URL - terms-and-conditions(Warranty URL)
- Features
| The nPODM xS Series WallPods are single gang nLight-enabled devices that provide one, two, and four scene control. These units provide a convenient method of selecting a custom lighting control scene for the room in which it is installed, or requesting a profile be run across several remote zones. By default, however, the buttons of an nPODM xS are configured as on/off toggle switches.The nPODM xS has soft-click push-buttons and has a green LED indicator for each button. These button are field replaceable and can be custom engraved. Two RJ-45 connectors allow the nPODM xS to be daisy-chain wired with CAT-5 cabling to other nLight network devices. |
| On/off + raise/lower control dimming |
| Standard dynamic |
| Standard humidity |
| Available with 2S and 4S versions |
| RJ45 ports network connection |
| Communicates with nLight® network |
| Remotely configurable |
| Runs locally stored scenes or global scenes |
| Programmable to initiate occ. sensor time delay sweep |
| Dynamic options for custom button names when pairing with Acuity brands nTUNE fixtures |
| Capable of programming 4 different scene types |
| Expiration timer programmable to each scene |
| Single gang switch box or low voltage ring mounting |
| Dual on-off action |
| Push button actuator |