Pico® PJ2-3BRL-GWH-L01 Wireless Lighting Control Switch, 3 VDC, White

Lighting Control Switches
789586 MFG #: PJ2-3BRL-GWH-L01
Lutron®
47.67000 / ea
  • Application: Lighting Control
  • Catalog Number: PJ2-3BRL-GWH-L01
  • Control: Button
  • Country of Origin: CN
  • Depth: 0.31 in
  • Dimensions: 2.6 in H x 1.3 in W x 0.31 in D
  • Finish: Gloss
  • Frequency Rating: 431 to 437 MHz
  • Gross Weight Per Pack: 0.05 lb
  • Lamp Type: LED
  • Length: 2.6 in
  • Material: Plastic
  • Mounting Type: Surface/Threaded
  • Series: PJ2
  • Standard: FCC, IC, COFETEL, SUTEL, ANATEL
  • Standards: ISO 9001:2008, FCC Approved, IC, COFETEL, SUTEL, Anatel Certified
  • Start Type: Pre-Set
  • Sub Brand: Pico®
  • Temperature Rating: 0 to 60 °C
  • Type: Wireless
  • UNSPSC: 52161525
  • Width: 1.3 in
  • Stock Status: NORMALLY STOCKED
  • Brand: Lutron®
  • Manufacturer: Lutron Electronics Co., Inc
  • Voltage Rating: 3 VDC
  • Color: White
Adjust lights from anywhere in a space with a Pico wireless control. This versatile and easy-to-use control requires no wires and is compatible with a wide variety of Lutron lighting and automated window treatment solutions.
QTY
  • Applications
  • Features
Lighting Control
Flexible and easy to use device that allows the user to control Lutron load-control devices from anywhere in the space. Battery-operated control requires no external power or communication wiring. Provides control for Energi Savr Node, Quantum and myRoom systems via a QS sensor module, and Caseta Wireless, Vive, Grafik Eye QS, Homeworks QS, Radio RA2 and Maestro Wireless systems directly. 10 year battery life (one CR2032 battery included). 3-button with raise/lower. On, Off, Raise/Lower and Preset. Lights icon labeling. 434 MHz
3-button with Raise/lower configuration and light icon engraving
Button Marking code is light
Utilizes Lutron reliable clear Connect RF technology
Easily add a new and/or additional point of control without the need for new wires
Indicator LED for visual feedback
Configure for use as a handheld control, car visor control, wall mount control, or table top control
10-year battery life
Maximum 90% non-condensing relative humidity
Indicator LED flashes to indicate a button press or when unit is in programming mode
Top button lights brighten to full intensity and shades/draperies go to open limit
Tap once so the devices go to preset levels /positions
Press and hold to save new preset level or position, press and hold for 6 seconds
Raise button lights increase in intensity and shades / draperies move towards open limit
Lower button lights decrease in intensity and shades / draperies move towards close limit
Activates scene 16 when used in scene mode with GRAFIK Eye® QS wireless applications
Activates scene 1 when used in scene mode with GRAFIK Eye® QS wireless applications