Caseta® PD-10NXD-WH Lutron Electronics CASETA PRO 1000W DIMMER
Wireless Dimmers
922155
MFG #: PD-10NXD-WH
Lutron®
120.00000
/ ea
- Actuator: Push-button
- Amperage Rating: 5 A
- Application: Lighting Control
- Catalog Number: PD-10NXD-WH
- Color: White
- Connection: Wire Leads
- Connection Type: Wire Leads
- Country of Origin: CN
- Dimensions: 4-11/16 in H x 2-15/16 in W x 1-1/8 in D
- Enclosure: PLASTIC
- Face Material: Metal;Plastic
- Finish: Gloss
- Frequency Rating: 50-60 Hz
- Gross Weight Per Pack: 0.2800 lb
- Insulation: Plastic
- Material: Metal/Plastic
- Mounting: Wallbox
- Mounting Type: Wall
- Number Of Poles: 1
- Operating Temperature: 32 to 104 °F
- Power Rating: 250/800/1000 W
- Series: PD-10NXD
- Size: 4.69 x 2.94 in
- Standard: cUL, NOM, FCC, IFTEL, NEMA
- Standards: cULus Listed, FCC Approved, Industry Canada, IFTEL, NOM Certified, NEMA 410
- Sub Brand: Cas?©ta
- Temperature Rating: 0 to 40 °C
- Type: Wireless in-wall dimmer, multi-location/3-way/single-pole
- UNSPSC: 39122206
- UPC 11: 78427614612
- UPC 12: 78427614612
- Wattage: 1,000 W
- Stock Status: NORMALLY STOCKED
- Brand: Lutron®
- Manufacturer: Lutron Electronics Co., Inc
- Lamp Type: Halogen/Incandescent
- Operation Mode: On/Off
- Sensing Range: 60/30 ft
- Switch Type: Push Button
- Voltage Rating: 120 VAC
Control your lights, shades and temperature from anywhere whether you're home or away. Caseta wireless dimmers and switches install in minutes, work with numerous bulb types - including dimmable LEDs and CFLs and bring the convenience of a connected home to your fingertips.
- Catalog URL - Caseta_PD_10NXD_WH_Catalog.pdf(Catalog URL)
- http://www.lutron.com(Seller Home Page URL)
- Install Instructions URL - Caseta_PD_10NXD_BL_Installation_Sheet.pdf(Install Instructions URL)
- Spec Sheet URL - 369919_WEB.pdf(Spec Sheet URL)
- Video - https://www.youtube.com/embed/v447iaT6DE4(Video)
- Applications
- Features
Lighting Control |
Controls 250 W LED (screw-base), 1000 W incandescent/halogen, 1000 VA (800 W) magnetic low-voltage, 520 W Hi-lume 1 percent 2-wire LED driver, or 5 A Tu-Wire fluorescent ballast loads. Simple, intuitive design with on, off and raise/lower buttons. Provides true dimming from each location with Pico wireless remotes. Offers reliable dimming of dimmable LEDs/CFLs, as well as halogens and incandescents |
Works with Pico® remote control |
Works with the Lutron® app (via a smart bridge or smart bridge pro) |
Lutron® patented clear Connect® RF technology works through walls and floors |
Works with Lutron® radio Powr Saver occupancy and VACancy sensors in standalone applications |
Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2 ESD protection |
Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 recommended practice on surge voltages in low voltage AC power circuits |
Load controls always operate locally and do not require system control |
Power failure memory should power be interrupted, the control will return to its previously set level prior to the interruption when power is restored |
Uses Lutron® claro wallplates or designer-style wallplates from other manufacturers |
Green status LED(s) to indicate load status |
CFL/LED/halogen/incandescent/magnetic low-voltage lamp type |