Juno® TU8BL Trac-Master® TU Series 2-Circuit Trac System, 8 ft L x 1-3/8 in W x 13/16 in D, Extruded Aluminum

Track Rails
76740 MFG #: TU 8FT BL
Juno®
68.25000 / ea
  • Alternate Catalog Number: 245G75
  • Application: Trac Lighting
  • ARRA Compliant: C
  • Buy American Compliant: Y
  • Catalog Number: TU 8FT BL
  • Color: Black
  • Country of Origin: US
  • Currency: USD
  • Dimensions: 91-7/8 in L
  • EU RoHS Indicator: C
  • Fixture Finish: Black
  • Gross Weight Per Pack: 5.1500 lb
  • Gross Weight per Pack Metric: 0.10
  • Gross Weight UOM Metric: kg
  • Height: 2.00 in
  • Height [Metric]: 5.0800 cm
  • Length [Metric]: 246.3800 cm
  • Mounting: Track/Monopoint
  • Series: TU Series
  • Standards: UL Listed, CSA Certified
  • Sub Brand: Juno
  • Suitable For Use With: Trac-Master® and Trac-Lites Trac Fixtures
  • Track Length: 8-ft
  • Type: 2-Circuit
  • UNSPSC: 39111508
  • UPC 11: 66120901009
  • UPC 12: 661209010094
  • Voltage Rating: 120 V
  • Warranty Description: 1 Year Limited. Warranty varies by product. See warranty information at: www.acuitybrands.com/resources/terms-and-conditions
  • Width [Metric]: 5.0800 cm
  • Stock Status: NONSTOCK
  • Brand: Juno®
  • Manufacturer: Acuity Brands
  • Depth: 13/16 in
  • Length: 97.00 in
  • Material: Extruded Aluminum
  • Width: 2.00 in
Trac-Master® TU-Series low-profile, 2-circuit trac sections can be surface or pendant mounted. They provide 2 separate 20-amp circuits from a single electrical feed or one 20-amp circuit controlled by 2 switches. The trac features an I-beam cross section that provides added strength and rigidity in suspended pendant applications and is compatible with a full range of feed, connector, and mounting accessories to satisfy virtually any requirement. Trac sections are available in 4, 8, and 12-foot lengths and accept all Trac-Master lamp holders. They are offered in white, black, or silver.
QTY
  • Applications
  • Features
Trac Lighting
2-circuit capability offers the flexibility of individual circuit control for combining dual lighting effects along a single trac
Two 20 A circuits provide maximum switching flexibility in long trac runs, the increased capacity eliminates 50-percent of the feed points
Extruded aluminium I-beam channel construction
Injection molded polycarbonate dead-end with set screw
One-piece thermoplastic insulator ensures consistent conductor spacing for reliable electrical contact
Insulating bushings supplied at mounting hole locations to prevent shorts to ground
Debossed polarity line provides visual cue to proper trac, trac connector, and fixture alignment
Integral raceway in top of channel accommodates pendant mounting hardware and wire routing to electrical feed
Three 12 gauge solid copper conductors
Rated 20 A at 120 VAC
Connectors and feeds simply push into trac sections
Standard lengths may be cut to length by installer
Supplied with toggle bolts for surface mounting