Lithonia Lighting® 4BEMWLED27KM6 4BEMW Dimmable IC/Non-IC Retrofit LED Module, LED Lamp, 120 VAC, Aluminum Housing
Retrofit LED Modules
919904
MFG #: 4BEMW-LED-27K-M6
Lithonia Lighting®
20.30000
/ ea
- Amperage Rating: 0.08 A
- Average Life: 50000 hr
- Catalog Number: 4BEMW-LED-27K-M6
- Color Temperature: 2700 K
- Country of Origin: CN
- Dimensions: 6-3/4 in L x 3-1/4 in W x 6-3/4 in H
- Gross Weight Per Pack: 0.7500 lb
- Lamp Base Type: E26
- Lamp Wattage: 9.8 W
- Lens Type: Acrylic/Diffused
- Lighting Technology: Center 2 Edge™
- Lumens: 650
- Mounting Type: Ceiling
- Recessed Trim Type: Baffle
- Series: E Series
- Standards: ARRA CompliantBuy American Act CompliantRoHS CompliantcUL ListedCSA CertifiedENERGY STAR® CertifiedNon-IC/IC RatedWSEC ASTM E283 for Air-Tight
- Type: 4 in Aperture Dimmable
- UNSPSC: 39111515
- UPC 11: 88879116939
- UPC 12: 88879116939
- Stock Status: NONSTOCK
- Brand: Lithonia Lighting®
- Manufacturer: Acuity Brands
- Ceiling Opening: 4-1/8 in
- Housing Material: Aluminum
- Lamp Type: LED
- Voltage Rating: 120 VAC
The E series LED recessed Module gives you optimized value and performance you can trust. Available in 4" and a flexible 5" & 6" size, E series combines dependable performance and low cost with the virtually maintenance-free, energy saving benefits of 35,000 hour-life LED. Ideal for both retrofitting and new construction in a variety of residential and light commercial settings such as multifamily residences, retail shops and offices.
- Features
| Aluminum spun reflector with deep baffle configuration for reduced glare |
| Combined LED and driver printed circuit board attached |
| Inner reflector cone funnels light through the pressed in diffused lens |
| General lighting for retrofit into existing downlight cans or new construction and remodel applications |
| Aluminum spun reflector with deep baffle configuration for reduced glare |
| Inner reflector cone funnels light through the pressed-in diffused lens |
| Diffused lens at end of mixing chamber to provide even light distribution for general illumination, equivalent to 65W BR30 lamp |
| Center 2 Edge technology created for a single point source |
| Primary power disconnect provided for simple connection to a dedicated LED connector in the housing |
| Suitable for installation in standard height rough-in sections |
| E Series' patent pending driver has zero inrush, which allows power loads to be calculated with actual rated wattages |
| Friction clips allow fitment into cans with an inside diameter of 4 to 4.5 in |
| -18 to 46 deg C temperature range |
| 0.99 power factor |
| 50/60 Hz input frequency |