Lithonia Lighting® PS3000-M3 Emergency Ballast, Fluorescent Lamp, 120/277 VAC
Fluorescent Emergency Ballasts
1112032
MFG #: PS3000-M3
Lithonia Lighting®
0.00000
/ ea
- Amperage Rating: 0.092/0.041 A
- Catalog Number: PS3000-M3
- Color: Black
- Country of Origin: CN
- Dimensions: 15-3/8 in L x 5-5/8 in W x 2 in H
- Frequency Rating: 50/60 Hz
- Gross Weight Per Pack: 10.3000 lb
- Lamp Base Type: T12/T8
- Material: Steel
- Mounting Type: Fixture
- Number Of Lamps: 1
- Series: PS3000
- Standards: ARRA CompliantBuy American Act CompliantRoHS CompliantUL 924NFPA 101NEC CompliantOSHA Approved
- Sub Brand: Power Sentry®
- Temperature Range: 32 to 100 °F
- Type: Battery Pack
- UNSPSC: 39111710
- UPC 11: 78423108529
- UPC 12: 78423108529
- Wattage: 10 W
- Stock Status: NONSTOCK
- Brand: Lithonia Lighting®
- Manufacturer: Acuity Brands
- Lamp Type: Fluorescent
- Voltage Rating: 120/277 VAC
Power Sentry batteries fit in the tightest of applications, including low-profile lensed troffers, downlighting and industrial lighting fixtures. They also feature an innovative Quick-Disconnect wiring harness that makes field maintenance and upgrades quick and easy. Designed for applications requiring full light output. Field installed with fluorescent fixture to operate lamp(s), based on one32W T8 linear lamp.
- Features
Designed for applications requiring full light output. Field installed with fluorescent fixture to operate lamp(s), based on one 32W T8 linear lamp. |
Sealed, maintenance free, high temperature range nickel cadmium battery ensures long life over wide temperature ranges |
Automatic recharge after discharge |
Emergency ballast may be remote mounted up to 50 ft from fixture or half the distance recommended by the AC ballast manufacturer, whichever is less |
For indoor environment |
Constant current series resistor type charger, provides high efficiency and reliable operation |
High efficiency push-pull inverter is the most effective method of converting DC power to AC power |
It provides maximum light output, battery life and reliability |
AC/LVD reset allows battery connection before AC power is applied and prevents battery damage from deep discharge |
Ensures long life over wide temperature ranges, battery automatically recharges after a 90 min discharge |
External battery connectors allow battery pack to be disabled for maintenance and installation |
Pilot light and test switch provide visual and manual means of monitoring system operation |
Two 1/2 in holes are required to permit mounting of pilot light/test switch in fixture housing |
Designed for applications requiring full light output |
Field installed with fluorescent fixture to operate lamp(s), based on one 32W T8 linear lamp |