Banner Engineering Multi-Beam® PBP 3/4-Wire Power Block, Photoelectric Sensor, 10 to 30 VDC, PNP Output
Sensor Power Blocks, Bases & Receptacles
13305
MFG #: PBP
BANNER®
83.39000
/ ea
- Catalog Number: PBP
- Connection Type: Cable
- Country of Origin: USA
- Environmental Conditions: -40 to 70 deg C Operating Temperature
- Gross Weight Per Pack: 1 lb
- Standards: CE Marked, UL Listed
- Suitable For Use With: Multi-Beam® Compact Modular Photoelectric Sensors
- Type: 3/4-Wire
- UNSPSC: 39121528
- UPC 11: 66248816392
- UPC 12: 66248816392
- Stock Status: NORMALLY STOCKED
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Output Type: PNP
- Sensor Type: Photoelectric
- Voltage Rating: 10 to 30 VDC
PBP: similar to model PBT, except that it provides a PNP sourcing type output transistor. Sourcing outputs are frequently required when interfacing to logic systems and programmable logic controllers (PLCs) which require a positive source of dc voltage to generate an input condition. This type of interface may also be accomplished by using PBT with a "pull-up" resistor installed between terminals #1 and #3.
- bannerengineering.com(Seller Home Page URL)
- Compliance Cert URL - Banner_PBA_Compliance_Certificate.pdf(Compliance Cert URL)
- Full Eng Drawing URL - Banner_Engineering_PBP46U_Full_Engineering_Drawing.pdf(Full Eng Drawing URL)
- Spec Sheet URL - SPE_157367.pdf(Spec Sheet URL)
- Tech Drawing URL - DRW_153768_pdf.pdf(Tech Drawing URL)
- Warranty URL - WAR_product-warranty.pdf(Warranty URL)
- Features
| Barrel housing style; Tough - 300 series stainless steel body withstands a wide variety of chemicals and cutting fluids; Tiny sensors are available as small as a 4 MM barrel (about the size of a single optical fiber assembly); Economical, self-contained sensors are available in diffuse or opposed sensing modes; no separate amplifier required; Advanced optical design provides high performance, and very repeatable sensing; Well-focused, narrow beam allows the entire barrel sensor to be recessed into fixtures (excluding 50 MM range models) |
| 10 to 30 VDC at less than 60 mA (current draw depends on scanner block used), 10% max. ripple input |
| 250 mA maximum output |
| Less than 1 VDC on state voltage drop |
| Less than 10 uA off-state leakage current |
| Range depends on sensor |
| Wiring chamber |
| 2 m length cable connection |
| One open collector PNP transistor output |