or to view stock quantity and your pricing.
Steiner serves territories in Northern Illinois, Northwest Indiana and Southern Wisconsin. Please for assistance if outside our sales territory.
Banner Engineering Multi-Beam® 2PBA 2-Wire Power Block, Photoelectric Sensor, 105 to 130 VAC
SKU13318
MFGR #2PBA
Your Cost: $125.50/ea
List: MULTI-BEAM 2-wire power block models 2PBA , 2PBB and 2PBD contain a low voltage power supply which utilizes a unique circuit to take a very small leakage current through the load and convert it to the dc power required to run the scanner block and logic module. They also contain the solid-state switch that operates the load, and a transient suppression circuit to prevent false operation from high voltage spikes on the incoming line. They are completely solid-state for unlimited operating life. MULTI-BEAM 2-wire power blocks offer the ultimate in simplicity of sensor hookup. They wire directly in series with an ac load, exactly like a limit switch. Response time of 2-wire power blocks is determined by the scanner block, which is 10 milliseconds on/off. A built-in false pulse protection circuit holds the output OFF for 100 milliseconds after power is initially applied to the power block.
MULTI-BEAM 2-wire power block models 2PBA , 2PBB and 2PBD contain a low voltage power supply which utilizes a unique circuit to take a very small leakage current through the load and convert it to the dc power required to run the scanner block and logic module. They also contain the solid-state switch that operates the load, and a transient suppression circuit to prevent false operation from high voltage spikes on the incoming line. They are completely solid-state for unlimited operating life. MULTI-BEAM 2-wire power blocks offer the ultimate in simplicity of sensor hookup. They wire directly in series with an ac load, exactly like a limit switch. Response time of 2-wire power blocks is determined by the scanner block, which is 10 milliseconds on/off. A built-in false pulse protection circuit holds the output OFF for 100 milliseconds after power is initially applied to the power block.
Catalog Number 2PBA Connection Type Cable Country of Origin US Environmental Conditions -40 to 70 deg C Operating Temperature Gross Weight Per Pack 0.2390 lb Standards CE Marked, CSA Approval, UL Listed Suitable For Use With Multi-Beam® Compact Modular Photoelectric Sensors Type 2-Wire UNSPSC 39121004 UPC 11 66248816546 UPC 12 66248816546 Stock Status NONSTOCK Brand BANNER® Manufacturer Banner Engineering Corp. Output Type SPST Solid State Switch Sensor Type Photoelectric Voltage Rating 105 to 130 VAC Power blocks offer the ultimate in simplicity of sensor hookup; They wire directly in series with an ac load, exactly like a limit switch; Response time of 2-wire power blocks is determined by the scanner block, which is 10 MS on/off; A built-in false pulse protection circuit holds the output off for 100 MS after power is initially applied to the power block; 2-wire power blocks will operate from -40 to 70 ° C; Resistive loads must be less than 15000 OHM and inductive loads must be greater than 1.2 WTT; Output: SPST solid-state switch; Wiring chamber 50/60 Hz input 3/4 A maximum (derated to 1/2 A at 70 deg C) output 10 A for 1 sec non-repeating maximum inrush Less than 10 V on-state voltage drop Less than 1 mA (resistive or inductive loads) leakage current Resistive loads must be less than 15000 Ohm and inductive loads must be greater than 1.2 W (10 mA) Range depends on sensor Wiring chamber 2 m length cable connection
content loaded
content loaded
content loaded
content loaded
- Attributes
- Documents & Resources
- Features
- Substitute Products
| Catalog Number | 2PBA |
| Connection Type | Cable |
| Country of Origin | US |
| Environmental Conditions | -40 to 70 deg C Operating Temperature |
| Gross Weight Per Pack | 0.2390 lb |
| Standards | CE Marked, CSA Approval, UL Listed |
| Suitable For Use With | Multi-Beam® Compact Modular Photoelectric Sensors |
| Type | 2-Wire |
| UNSPSC | 39121004 |
| UPC 11 | 66248816546 |
| UPC 12 | 66248816546 |
| Stock Status | NONSTOCK |
| Brand | BANNER® |
| Manufacturer | Banner Engineering Corp. |
| Output Type | SPST Solid State Switch |
| Sensor Type | Photoelectric |
| Voltage Rating | 105 to 130 VAC |
| Power blocks offer the ultimate in simplicity of sensor hookup; They wire directly in series with an ac load, exactly like a limit switch; Response time of 2-wire power blocks is determined by the scanner block, which is 10 MS on/off; A built-in false pulse protection circuit holds the output off for 100 MS after power is initially applied to the power block; 2-wire power blocks will operate from -40 to 70 ° C; Resistive loads must be less than 15000 OHM and inductive loads must be greater than 1.2 WTT; Output: SPST solid-state switch; Wiring chamber |
| 50/60 Hz input |
| 3/4 A maximum (derated to 1/2 A at 70 deg C) output |
| 10 A for 1 sec non-repeating maximum inrush |
| Less than 10 V on-state voltage drop |
| Less than 1 mA (resistive or inductive loads) leakage current |
| Resistive loads must be less than 15000 Ohm and inductive loads must be greater than 1.2 W (10 mA) |
| Range depends on sensor |
| Wiring chamber |
| 2 m length cable connection |