or to view stock quantity and your pricing.
Steiner serves territories in Northern Illinois, Northwest Indiana and Southern Wisconsin. Please for assistance if outside our sales territory.
Banner Engineering Maxi-Beam® RPBR Power Block, Photoelectric Sensor, 12 to 250 VAC/12 to 30 VDC
Banner Engineering Maxi-Beam® RPBR Power Block, Photoelectric Sensor, 12 to 250 VAC/12 to 30 VDC
SKU13478
MFGR #RPBR
Your Cost: $169.24/ea
List: Model RPBR operates the MAXI-BEAM with either ac or dc. It offers an SPST "hard" relay contact between wiring base terminals #3 & #4, which allows the MAXI-BEAM sensor to directly interface with loads which draw high current. It also allows series connection ("AND" logic) with multiple dc sensors.
Model RPBR operates the MAXI-BEAM with either ac or dc. It offers an SPST "hard" relay contact between wiring base terminals #3 & #4, which allows the MAXI-BEAM sensor to directly interface with loads which draw high current. It also allows series connection ("AND" logic) with multiple dc sensors.
Catalog Number RPBR Connection Type Cable Country of Origin US Environmental Conditions -40 to 50 deg C Operating Temperature Gross Weight Per Pack 0.2790 lb Standards CSA Certified, cULus Listed Suitable For Use With Maxi-Beam® Modularized Photoelectric Sensors UNSPSC 39121004 UPC 11 66248826132 UPC 12 66248826132 Stock Status NONSTOCK Brand Banner® Manufacturer Banner Engineering Corp. Output Type SPST Electromechanical Relay Sensor Type Photoelectric Voltage Rating 12 to 250 VAC/12 to 30 VDC Model RPBR operates the MAXI-BEAM with either AC or DC; It offers an SPST hard relay contact between wiring base terminals #3 and #4, which allows the MAXI-BEAM sensor to directly interface with loads which draw high current; It also allows series connection ("AND" logic) with multiple DC sensors; Contain an output switch for interfacing to loads or to control circuitry; include status LEDs which continuously indicate the state of the output circuit and input power" 50/60 Hz, 40 mA exclusive of load current input 250 VAC 30 VDC maximum contact rating Install MOV across contact if switching inductive load 20 ms open and close contact response 10000000 operations mechanical life Range depends on sensor Wiring chamber 2 m length cable connection
content loaded
content loaded
content loaded
content loaded
- Attributes
- Documents & Resources
- Features
- Substitute Products
| Catalog Number | RPBR |
| Connection Type | Cable |
| Country of Origin | US |
| Environmental Conditions | -40 to 50 deg C Operating Temperature |
| Gross Weight Per Pack | 0.2790 lb |
| Standards | CSA Certified, cULus Listed |
| Suitable For Use With | Maxi-Beam® Modularized Photoelectric Sensors |
| UNSPSC | 39121004 |
| UPC 11 | 66248826132 |
| UPC 12 | 66248826132 |
| Stock Status | NONSTOCK |
| Brand | Banner® |
| Manufacturer | Banner Engineering Corp. |
| Output Type | SPST Electromechanical Relay |
| Sensor Type | Photoelectric |
| Voltage Rating | 12 to 250 VAC/12 to 30 VDC |
| Model RPBR operates the MAXI-BEAM with either AC or DC; It offers an SPST hard relay contact between wiring base terminals #3 and #4, which allows the MAXI-BEAM sensor to directly interface with loads which draw high current; It also allows series connection ("AND" logic) with multiple DC sensors; Contain an output switch for interfacing to loads or to control circuitry; include status LEDs which continuously indicate the state of the output circuit and input power" |
| 50/60 Hz, 40 mA exclusive of load current input |
| 250 VAC 30 VDC maximum contact rating |
| Install MOV across contact if switching inductive load |
| 20 ms open and close contact response |
| 10000000 operations mechanical life |
| Range depends on sensor |
| Wiring chamber |
| 2 m length cable connection |