Banner Engineering VTBP6GRLQ VTB Ergonomic Handle Optical Touch Button, 12 to 30 VDC, 100 ms On/Off Response Time
Optical Touch Buttons/Data Couplers
554164
MFG #: VTBP6GRLQ
BANNER®
189.26000
/ ea
- Catalog Number: VTBP6GRLQ
- Color: Green/Red
- Connection Type: 5-Pin M12
- Country of Origin: UA
- Enclosure Type: NEMA 1/3/4/4X/12/13/IP66
- Environmental Conditions: 90% at 55 deg C Non-Condensing Relative Humidity
- Gross Weight Per Pack: 1 lb
- Indicator LEDs: (2) Green
- Mounting Type: Threaded Base
- Operating Temperature: -20 to 50 °C
- Output Type: PNP
- Series: VTB
- Size: 30 mm Dia x 59.9 mm L
- Standards: CE Certified
- Type: Ergonomic Handle
- UNSPSC: 39121528
- UPC 11: 66248875029
- UPC 12: 66248875029
- Stock Status: NORMALLY STOCKED
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Connection Size: M12x1
- Material: Thermoplastic Polysulfone
- Response Time: 100 ms On/Off
- Voltage Rating: 12 to 30 VDC
Banner Engineering Optical Touch Button, Ergonomic Handle, Series: VTB, 12 to 30 VDC, 100 ms On/Off Response, PNP Output, 5-Pin M12, M12x1, 30 mm Dia x 59.9 mm L, NEMA 1/3/4/4X/12/13/IP66, -20 to 50 deg C Operating, Threaded Base Mount, Environmental Conditions: 90% at 55 deg C Non-Condensing Relative Humidity, (2) Green Indicator LEDs, Thermoplastic Polysulfone, Green/Red
- Features
| Microcontroller-based photoelectric touch buttons; A cost-effective and easy-to-install alternative to capacitive touch switches and mechanical push buttons for error proofing and parts-verification applications; A cost-effective and easy-to-install alternative to capacitive touch switches and mechanical push buttons for error proofing and parts-verification applications; Immune to ambient light, EMI and RFI interference; High excess gain cuts through heavy airborne contamination to function in almost any environment |
| Microcontroller-based photoelectric touch buttons |
| A cost-effective and easy-to install alternative to capacitive touch switches and mechanical push buttons for error proofing and parts-verification applications |
| Ergonomically designed to eliminate hand, wrist and arm stresses associated with repeated switch operation, requires no physical pressure to operate |
| Illuminated base provides a bright, easy-to-see job light in one or two colors, depending on model |
| LED power and output indicators |
| Immune to ambient light, EMI and RFI interference |
| High excess gain cuts through heavy airborne contamination to function in almost any environment |
| Two-color job light model |
| Protected against reverse polarity and transient voltage (fast-transient and over voltage |
| Protected against false pulse on power-up (outputs held off for 1 second at power-up), overload and short-circuits |
| Translucent white polycarbonate base, electronics fully epoxy encapsulated |
| Up to 120000 lux (direct sunlight) ambient light immunity |
| 150 mA maximum load output rating |
| Less than 1.5 V at 150 mA on-state saturation voltage /less than10 uA off-state leakage current |
| 5-pins M12/euro style integral quick disconnect cable connection |
| 30 mm mounting thread |
| Normally open actuator operation |
| Integral quick disconnect |
| One open collector PNP transistor output |