Banner Engineering OTBA5L Opto-Touch® OTB Actuator Illuminated Optical Touch Button With Field Cover, 105 to 130 VAC
Optical Touch Buttons/Data Couplers
13613
MFG #: OTBA5L
BANNER®
148.03000
/ ea
- Catalog Number: OTBA5L
- Color: Red
- Connection Type: Cable
- Enclosure Type: IP66/NEMA 1/3/4/4X/12/13
- Environmental Conditions: 90% at 55 deg C Non-Condensing Maximum Relative Humidity
- Gross Weight Per Pack: 1 lb
- Indicator LEDs: Two-Red
- Mounting Type: Threaded
- Operating Action: Momentary
- Operating Temperature: -20 to 50 deg C
- Output Type: SPDT Electromechanical Relay
- Series: OTB
- Size: 30 mm Dia x 59.9 mm L
- Standards: CE Marked, CSA LR41887-24, UL E71083
- Type: Actuator Illuminated
- UPC 11: 66248832167
- UPC 12: 66248832167
- Stock Status: NONSTOCK
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Material: Polycarbonate
- Response Time: 100 ms
- Voltage Rating: 105 to 130 VAC
Banner Engineering Opto-Touch® Optical Touch Button, Actuator Illuminated, Series: OTB, 105 to 130 VAC, 100 ms Response, SPDT Electromechanical Relay Output, Momentary Operating Action, Cable, 30 mm Dia x 59.9 mm L, IP66/NEMA 1/3/4/4X/12/13, -20 to 50 deg C Operating, Threaded Mount, Environmental Conditions: 90% at 55 deg C Non-Condensing Maximum Relative Humidity, Two-Red Indicator LEDs, Polycarbonate, Red
- Features
| Zero-force activated photoelectric replacements for mechanical push buttons |
| Momentary action touch buttons with SPDT electromechanical relay |
| Optimized for easy mounting with a 30 mm threaded base |
| Ergonomic design eliminates hand, wrist and arm stress |
| Field covers included to prevent inadvertent activation from loose clothing, debris |
| Highly resistant to both single and mixed EMI and RFI noise sources |
| Protected against reverse polarity and transient voltages |
| 100 ms delay on power-up, outputs do not conduct at this time |
| Protected against false pulse on power-up and continuous overload or short circuit of outputs |
| Two indicator LEDs, one lights whenever power is applied, the other lights whenever the switch is activated |
| Electronics fully epoxy-encapsulated fiber reinforced polyester base |
| Threaded base has M30 x 1.5 external threads and 1/2 in NPSM internal threads |
| Base requires a 1-3/16 in diameter mounting hole (fits most standard automotive size jumbo legend plates and oil tight pushbutton holes) |
| Up to 100000 lux ambient light immunity |
| Maximum voltage is 250 VAC/30 VDC maximum voltage, maximum current is 7 A (resistive load), 1 hp maximum |
| Minimum load is 0.05 W (DC), 0.05 VA (AC) |
| Mechanical life of relay is 50000000 operations (minimum) |
| Electrical life of relay is 100000 operations (minimum) at full resistive load |
| Transient suppression recommended when switching inductive loads |
| PVC jacketed 22 AWG 5-conductor 2 m cable |